Description
Motherboard for the AM4 socket and DDR4 memory in a compact case
The Micro-ATX DDR4 motherboard Gigabyte A520M DS3H V2 has the AMD A520 chipset and measures 24.4 × 24.4 cm. The socket takes AMD Ryzen 5000, 4000 G and 3000 series processors, including the Ryzen 5000 G series.
Memory and storage
Four DIMM slots run in two channels and take up to 128 GB of memory in total, up to 32 GB per module. The board supports DDR4 memory with XMP profiles at up to 3200 MT/s. The M.2 slot takes a 2280-length SATA or PCIe 3.0 ×4 SSD, and four SATA 6 Gb/s ports support RAID 0, 1 and 10.
Expansion slots and connections
A PCIe 3.0 ×16 slot takes the graphics card, and the board also has a PCIe 3.0 ×1 slot. With a Ryzen 5000 G or 4000 G series processor the DisplayPort 1.4 output shows up to 5120 × 2880 pixels and the HDMI 2.1 output up to 4096 × 2160 pixels, both at 60 Hz. The rear panel has four USB 3.2 Gen 1 and four USB 2.0 ports, a PS/2 port for a keyboard or mouse, a 1 Gbit/s RJ-45 port and three audio jacks. The jacks of the Realtek ALC887 audio codec can be set up to 7.1-channel output in the audio software.
Installation
To fit the processor, lift the socket locking lever fully, line up pin one marked with a triangle on the processor and the socket, and lower the lever while holding a finger on the middle of the processor. A single memory module goes into slot DDR4_A2 or DDR4_B2, two modules into slots DDR4_A2 and DDR4_B2. The board needs a 24-pin ATX and an 8-pin 12 V connector from the power supply, and the maker recommends a power supply of at least 500 W.
In the box
- Motherboard Gigabyte A520M DS3H V2, 1 pc
- SATA cables



Reviews
There are no reviews yet.