Description
Motherboard for building a desktop PC with an Intel Core Ultra processor
The Gigabyte H810M H is a micro ATX motherboard with an LGA 1851 socket, the Intel H810 chipset and DDR5 memory support, measuring 24.4 × 21.5 cm. Each memory module can be up to 64 GB, at speeds up to 6400 MT/s. With two modules the memory runs in dual-channel mode.
Expansion slots and storage
A PCIe 4.0 x16 slot takes a graphics card or an NVMe SSD, and a PCIe 3.0 x1 slot takes an add-in card. The M.2 slot takes a 2280 PCIe 4.0 NVMe SSD, while hard drives and SATA SSDs connect to the SATA 6 Gbit/s ports.
Video outputs, network and audio
With the processor’s integrated graphics, a monitor connects via HDMI at up to 4096 × 2160 at 60 Hz or via D-Sub at up to 1920 × 1200. The rear panel has a PS/2 port, one USB 3.2 Gen 1 port, five USB 2.0 ports, a 1 Gbit/s RJ-45 network port and three audio jacks. The Realtek audio codec supports up to 7.1-channel sound, set up in the audio software. An onboard USB 3.2 Gen 1 header serves a front-panel USB-C port on the case.
Installation
To fit the processor, release the socket lever, lift the metal load plate, place the processor by its triangle marking and close the plate, after which the plastic cover comes off by itself. Apply a thin layer of thermal paste before fitting the cooler, and connect the cooler’s power lead to the CPU_FAN header. Slide the M.2 SSD into its slot at an angle and secure it with the clip. Press Delete at start-up to enter the BIOS, and update the BIOS with Q-Flash.
In the box
- Gigabyte H810M H motherboard
- Two SATA cables
- Rear I/O shield
- User’s manual and quick installation guide



Reviews
There are no reviews yet.