Description
Space-saving kitchen solution: an induction hob with an integrated extractor for open-plan and smaller kitchens
Elica NikolaTesla Fit 3Z BL/A/60 is a 60 cm wide induction hob with an integrated extractor that helps keep the worktop clean and free of a separate hood. The black vitroceramic glass surface, the built-in extraction and the smart control functions create a single solution that saves space and keeps odours and steam under control in the kitchen.
Key features
- The 2in1 solution combines an induction hob and an extractor in one appliance, freeing up space for a traditional wall-mounted or ceiling hood and suiting smaller and open-plan kitchens particularly well.
- Duct out extraction leads the steam and odours produced during cooking outside through ducting, ensuring effective air exchange and an air flow of up to 595 m³/h according to the manufacturer.
- Three induction zones with extendable areas allow you to use both small and larger pots and pans and flexible cooking areas according to your cooking needs.
- The touch slider control offers convenient power adjustment, separate control of the cooking zones and the extractor, and easy access to the timer and additional functions.
- Powerful but controllable performance with a total power of up to 7200 W and a Power management function that allows you to limit the maximum power consumed if needed, according to the kitchen’s electrical system.
- Safety functions such as a child lock, a residual heat indicator, an automatic rapid heat-up function and a pause function help reduce mistakes and make use safer.
- Low noise level thanks to optimised air flow, with a noise level of approximately 42–66 dB depending on the operating speed according to the manufacturer, suits open-plan kitchen solutions well.
- Energy-saving operation: an energy class A extractor with class B fluid dynamic efficiency helps reduce energy consumption compared with less efficient solutions.
Compatibility with the kitchen and ventilation
Elica NikolaTesla Fit 3Z is a standard-width 60 cm built-in hob that fits most kitchen furniture solutions with 60 cm base units. The appliance is designed as a duct out solution, where steam and odours are led directly outside through a ventilation duct, which ensures better moisture removal than mere indoor air recirculation.
When planning the ventilation system, it is worth keeping the ducting as short and straight as possible and avoiding excessive bends, in order to maintain good air flow and keep the noise level low. If you want to use the appliance in recirculation mode, the manufacturer offers separate recirculation accessories and carbon filters for this, through which the cleaned air is directed back into the room. The kits required for recirculation are usually not part of the standard equipment and must be purchased separately if desired.
Use and maintenance
The hob is operated with touch slider control, which allows the power of each cooking zone to be adjusted smoothly. If needed, you can use the boost, or booster, function to bring water to the boil or heat a pan quickly, and with the timer it is easy to keep track of the cooking time without constantly looking at the clock.
Induction technology heats the bottom of the cookware directly, so heating is fast and the surroundings stay relatively cool. The child lock and the residual heat indicator increase safety, as they reduce the risk of accidental switching on and signal when the surface of the cooking zone is still warm. The pause function allows you to interrupt cooking for a moment and then continue with the same settings, which is convenient, for example, in the case of a phone call or the doorbell.
The efficient operation of the extractor part depends primarily on the condition of the filters. The appliance uses an integrated grease filter, which catches the grease produced during cooking and which must be cleaned at regular intervals. According to the manufacturer’s instructions, the grease filter can usually be washed by hand or in a dishwasher. The vitroceramic glass surface is easy to maintain if you clean it after it has cooled with a soft cloth and a suitable cleaning agent, avoiding abrasive sponges and strong chemicals.
Installation and use
The appliance is designed for surface-mounted or flush-with-worktop installation, which allows you to choose the solution that suits the kitchen design. During installation, the cut-out dimensions given in the manufacturer’s manual must be followed, and sufficient air exchange and ventilation clearances inside the cabinet must be ensured. The electrical connection must be made by a qualified electrician, taking into account the kitchen’s main fuse and, if necessary, setting the Power management function so that the total power suits your home’s electrical network.
In duct out mode, the extractor must be connected to a suitable ventilation duct that directs the air directly outside. The diameter and length of the ducting should be chosen according to the manufacturer’s recommendations, in order to avoid an excessive noise level and a reduction in air flow. If recirculation accessories are used, the carbon filters specified by the manufacturer must also be installed, and it must be ensured that the cleaned air can flow freely back into the room.
Why choose Elica NikolaTesla Fit 3Z BL/A/60?
Elica NikolaTesla Fit 3Z BL/A/60 combines an induction hob and an extractor into a single, space-saving solution that suits both a new kitchen and an interior being renovated. Efficient duct out extraction, a low noise level, an energy class A extractor, extendable cooking zones and several safety functions create a practical and modern appliance for everyday cooking. If you value clean lines and an open view and want to reduce the number of separate appliances in the kitchen, this built-in hob with an extractor is a well-thought-out choice.


Reviews
There are no reviews yet.