Description
Clean air and more worktop space in one built-in solution
The built-in induction hob with cooker hood Elica NikolaTesla Fit XL BL/A/83 helps keep the air in an open kitchen cleaner and frees up wall space by removing the need for a separate hood. The 83 cm wide glass-ceramic hob with four zones and a central extraction suits kitchens where an even worktop and good access to the cabinet are important. Thanks to the integrated hood, the cooking area is compact, and steam and odours are removed right at the pan.
Main features
- Four induction zones and 2x Bridge make it possible to use both standard and larger pots and pans, joining two zones into one larger cooking area when needed.
- The integrated cooker hood with extraction directs steam and odours straight into the ventilation, with an airflow range of 220 to 620 m3/h, which also suits open kitchen solutions well.
- Touch-sensitive Slider control makes adjusting the power levels quick and precise, both on the hob zones and on the hood.
- Useful functions such as booster, timer and pause help speed up cooking, schedule when the hob switches off and take short pauses without losing the settings.
- The child lock and residual heat indicator increase safety by preventing accidental switching on and warning of a hot cooking zone.
- An energy class A motor and an efficient airflow solution help reduce energy consumption, and the liquid collection and drainage system protects the kitchen cabinet in case of boil-overs.
- Surface or flush installation gives a minimalist and even worktop that suits modern kitchen design.
- A low noise level of 43 to 66 dB in the operating modes means that using the appliance disturbs conversation and daily life in an open kitchen less.
Compatibility with the kitchen and everyday use
The Elica NikolaTesla Fit XL BL/A/83 is designed to be integrated into the worktop above a standard base cabinet with a width of at least about 80 cm. The dimensions of the hob are approximately 83 × 51.5 × 25 cm, so the installation must take into account the cabinet width and depth as well as the space needed for the ventilation duct. In its factory setting the appliance is intended for a ventilation connection with extraction, but with the manufacturer’s accessories it can also be adapted into a solution that directs the air back into the room, if the kitchen has no direct connection to the ventilation shaft.
The hob zones and the hood are controlled with touch-sensitive slider control, where power can be smoothly increased or decreased. The induction zones have several power levels with an accelerating booster function and two Bridge areas, which can be used to create a larger and evenly heating surface for a grill pan or an oval pot. Automatic heating and power management functions help keep the load on the electrical network at a suitable level.
Everyday maintenance is made easier by the perfectly smooth glass-ceramic surface, from which splashes are easy to remove with a cloth. The central grille of the hood is removable to give access to the grease filters and the internal collection area, where condensate and smaller boil-overs may collect. The metal filters are washable, and when the recirculation mode is used, the carbon filters are long-lasting and can be periodically regenerated according to the manufacturer’s instructions.
Installation and use
The appliance is suitable both for top mounting and for flush installation, allowing you to choose the solution that suits the kitchen furniture. During installation, a correct ventilation connection and a sufficient airflow duct diameter must be ensured, and the necessary space must also be left in the cabinet for the air ducts and the liquid drainage system. The electrical connection to a 220 to 240 V network must be carried out by a qualified electrician. When using it, it is recommended to start from a lower power level, increase it as needed with the Slider control and use the booster function only briefly, for example to boil water quickly. After cooking, the hood can be left running at a lower speed for a while to remove remaining odours and steam.
When to choose the Elica NikolaTesla Fit XL BL/A/83
The Elica NikolaTesla Fit XL BL/A/83 is a good choice if you want a space-saving solution and clean air without a separate wall hood or ceiling construction. The 83 cm wide four-zone induction hob with an integrated cooker hood suits open kitchens especially well, where both quiet operation and a uniform, minimalist look are important. The energy-efficient class A motor, flexible Bridge zones and practical safety functions make it a functional and modern choice that replaces both a standard hob and a traditional cooker hood at once.



Reviews
There are no reviews yet.