Description
Gas hob burners, ignition and flame failure protection
The built-in gas hob has four round burners with a total output of 7,800 W: the front left is a 3,000 W burner, the rear left and right are 1,900 W burners, and the front right is a 1,000 W simmer burner. The large burner measures 100 mm in diameter, the 1,900 W burners 70 mm, and the simmer burner 54 mm. The control knobs are on the front right edge of the hob, and each burner has its own knob. The flame is lit with electronic ignition. If the flame goes out, the thermocouple flame failure device shuts off the gas supply to the burner.
Installing the built-in gas hob
The hob is 595 mm wide and 510 mm deep and is installed in a worktop cut-out measuring 560 × 480 mm. The hob projects 49 mm below the worktop, and at least 20 mm of free space must be left below its base. At least 55 mm must be left between the wall and the back edge of the cut-out. The electronic ignition operates on 220–240 V, and the power cable is 1.1 m long. The hob is factory-set for G20 (2E) natural gas at a supply pressure of 20 mbar.




Reviews
There are no reviews yet.