Description
Induction hob with slider control and Bridge
The built-in induction hob Electrolux EIV644 sits in the worktop without a frame and has 4 cooking zones on its black glass-ceramic surface. On the slider of the control panel you choose heat setting 1–14 or PowerBoost with a swipe, and OffSound Control can switch the sounds off.
An induction hob creates the heat in the pan
An induction hob is a hob whose electromagnetic field creates heat directly in the pan base, while the glass ceramic is only warmed by the pan. The EIV644 zones adjust automatically to the pan base size; a base diameter of 125–210 mm suits them. On a ceramic hob the zone itself heats first and aluminium and copper pans also work, while an induction hob heats faster.
Cooking zones, Bridge and PowerBoost
Each zone is rated at 2300 W, and PowerBoost raises it to 3200 W for up to 10 minutes. Bridge joins the left-hand or right-hand zones into one 39.2 × 22.0 cm area when the pan covers the centres of both zones. Automatic heat-up starts at the highest level and then continues at the chosen setting.
Timers and safety functions
The count-down timer switches a zone off after 00–99 minutes, the CountUp Timer shows how long a zone has been running, and the minute minder works independently of the zones. Pause lowers all zones to level 1 and Lock prevents the heat setting from being changed by accident. The 3-step OptiHeat Control shows whether a zone is still hot enough to cook, to keep warm, or only has residual heat. The child lock is set with a 4-second touch, and automatic switch-off stops the hob after 1.5 hours at levels 10–14 and after 6 hours at levels 1–3.
Installation and electrical connection
The hob measures 590 × 520 × 44 mm and needs a 560 × 490 mm cut-out; leave at least 55 mm from the cut-out edge to the back wall. A cooling fan sits under the hob, so leave at least 2 cm between the contents of a drawer and the hob base. The supply is 220–240 V or 400 V 2N, 50–60 Hz, the connected load 7350 W, and power management shares up to 3700 W per phase between the zones. A qualified technician installs the hob and a qualified electrician makes the electrical connection.
Cleaning and care
Clean the hob after every use: remove melted plastic, film and sugary spills at once with a special glass scraper. Remove limescale, water and grease stains from the cooled surface with a damp cloth and a non-abrasive detergent, then dry with a soft cloth. Clean shiny metallic stains with a cloth moistened in a water and vinegar solution.
In the box
- Induction hob Electrolux EIV644, 1 pc
- Connection cable











Reviews
There are no reviews yet.