Description
Clean air in an open-plan kitchen without a hanging hood: built-in induction hob with extractor ELICA NikolaTesla Switch EVO BL/A/83
ELICA NikolaTesla Switch EVO BL/A/83 combines an induction hob and an integrated extractor in one appliance to keep the kitchen air clean without a separate hanging hood. The 83 cm wide induction hob with extractor is especially well suited to kitchen islands and open-plan kitchens where space saving, quieter operation and a uniform, modern worktop are valued.
Main features
- 2in1 solution – the induction hob and the extractor are in the same housing, which saves space in the wall cabinets and creates a clean kitchen design without a hanging hood.
- The induction hob with four cooking zones and two zones with the Bridge function lets you join zones and use larger pots, pan plates or grill plates.
- Power of up to 7200 W and the Power Booster function ensure very fast heating, so water boils and a pan heats up noticeably faster than on ordinary electric hobs.
- The integrated extractor works in extraction mode, the airflow is up to 620 m³/h according to the manufacturer and the energy efficiency class is A++, which helps to reduce energy consumption.
- The noise level is in the range of 34–71 dB, so the extractor works relatively quietly when preparing most everyday meals and does not disturb conversation in an open-plan kitchen.
- Touch slider type electronic control, timer, automatic heating, pause function and power management make the appliance intuitive and precise to use.
- The child lock, the residual heat indicator and the natural safety of induction (the cooking zone heats up only under the cookware) add safety to everyday use.
- The black frameless glass-ceramic surface is suitable for both surface-mounted and flush installation with the worktop, and it is smooth and easy to clean.
Fit for your kitchen and care
This built-in hob with extractor is about 83 cm wide and is designed to be installed into a worktop of standard depth. Thanks to the option of surface-mounted or flush installation with the worktop, you can choose whether to emphasise the appliance or blend it almost unnoticeably into the worktop surface. The model comes from the factory in extraction mode, which means that the air is led out through a duct, so when planning the kitchen project you should provide for the location of the ducts and the space under the cabinet.
Use is based on a touch-sensitive control panel where you can select power levels by sliding, start the Power Booster function, set the timer and, if needed, use the pause function. Induction heating responds quickly, which suits both everyday cooking and situations where a quick temperature change is needed. The extractor control is integrated into the same panel, which leaves the area around the worktop free of mechanical buttons.
Maintenance is easy because the smooth vitroceramic surface has no visible frame and is accessible from above. After cooling, wiping with a damp soft cloth is usually enough, and if needed a suitable glass-ceramic surface cleaner can be used, avoiding abrasive sponges or sharp objects. For maintaining the extractor, follow the manufacturer’s instructions and regularly check and, if necessary, clean or replace the relevant filters according to the procedure given in the manual.
The product belongs to energy efficiency class A++ and to class A for air extraction flow and grease separation efficiency, which indicates well thought-out airflow and economical operation even with regular use.
Installation and use
ELICA NikolaTesla Switch EVO BL/A/83 is intended for integration into a worktop, so it is recommended to entrust the installation to a qualified installer or electrician. During installation, take into account that this is an extraction version, that is, the air is led out through a ventilation pipe and the space under the cabinet must allow the air duct to be run correctly. For the electrical connection, follow the manufacturer’s instructions and local electrical safety requirements.
When using it, keep a few practical principles in mind:
- On an induction hob, use pots and pans with a magnetic base to ensure fast and even heating.
- To remove steam and odours better, switch the extractor on shortly before cooking and let it run for a few minutes after the food is ready.
- After the cooking zones have cooled, wipe the glass surface with a damp soft cloth to prevent food residue and stains from burning on.
- The power management function lets you limit the maximum power of the hob, which can be useful if the load on the electrical system is limited.
Included
The set includes the ELICA NikolaTesla Switch EVO BL/A/83 built-in induction hob with built-in extractor. For the choice of accessories and air duct components, ask us.
When to choose ELICA NikolaTesla Switch EVO BL/A/83?
This model is a good choice if you want an open-plan kitchen where the extractor does not block the view, yet the air is still cleaned effectively. With one appliance you get both a modern induction hob and an extractor with powerful extraction, which saves space and simplifies planning. The black frameless glass surface, the wide 83 cm cooking area, the versatile Bridge zones and the easy-to-understand touch slider control create a functional whole for both everyday cooking and preparing more demanding dishes.


Reviews
There are no reviews yet.