Description
Space-saving built-in solution for an open-plan kitchen
The built-in induction hob with extractor ELICA NikolaTesla Switch Glow RAW BR/A/83 combines a powerful hob and efficient fume extraction in one appliance, freeing the kitchen’s wall or island space from a hanging extractor. The 83 cm wide matt black worktop fits into a modern kitchen, and the glass-ceramic surface is smooth and easy to clean. Thanks to the A++ energy efficiency class, the appliance keeps energy consumption under control in everyday use too.
Main features
- The 2-in-1 solution combines an induction hob and an integrated extractor, reducing the need for separate appliances and leaving more cabinet space in the kitchen.
- 4 induction zones and 2xBridge connection zones allow you to use both individual saucepans and larger pans and roasting dishes, joining two zones into one larger surface.
- 7,200 W total power and the Booster function ensure fast heating and give extra power when needed, for example when bringing water quickly to the boil.
- Fume extraction of up to 620 m³/h with minimum, maximum and boost modes helps keep the kitchen air clear during both everyday cooking and intensive frying.
- The child lock and residual heat indicator increase safety by reducing the risk of accidental switch-on and warning about hot zones even after switching off.
- The surface-mounted or flush-mounted installation gives you the freedom to choose whether the hob sits slightly above the worktop or level with it, creating a uniform and minimalist look.
- Touch slider control makes selecting power levels, the timer, pause and the Booster function quick and intuitive, without buttons or rotary knobs.
- Efficient energy efficiency: the A++ class, A-class fluid dynamics and A-class grease filtration ratings help reduce energy consumption and improve the air cleaning result.
Suitability for different kitchens
The 83 cm wide ELICA NikolaTesla Switch Glow RAW BR/A/83 belongs to the 80 cm hob class and suits both a straight worktop and a kitchen island. The dimensions of the appliance are approximately 83 × 51.5 × 21.1 cm, so it is easy to plan for already when designing the kitchen. The matt black finish and frameless design create a minimalist modern look that suits open-plan kitchen solutions especially well.
The extractor’s recirculation mode allows the appliance to be used even where the extraction duct cannot be connected to a wall or ceiling. If extraction is possible, the extraction mode, which leads the air directly outside, can be used. In quieter operation the minimum noise level is from 34 dB, up to 67 dB at maximum and up to 71 dB in boost mode, so it also suits a shared living room and kitchen space.
Installation and use
The appliance is designed for surface-mounted or flush-mounted installation in the kitchen worktop. During installation, the cabinet space below and the airflow path must be taken into account so that the air can move freely either into the extraction duct or back into the room. The electrical connection must be made by a qualified electrician in accordance with local requirements and the manufacturer’s instructions, and it is important to follow the manufacturer’s installation manual during installation.
- The worktop cut-out is made according to the manufacturer’s technical drawing so that the hob and extractor fit the worktop tightly and safely.
- The airflow provision requires sufficient space in the cabinet and correctly placed ducts or an air recirculation solution, depending on the selected mode.
- The electrical connection is made to a 220–240 V power supply, taking into account the appliance’s total power of 7,200 W and possible load limits in the home electrical system.
- Everyday use takes place from the touch control panel, where you select the cooking zone, set the power level, use the Booster function and, if needed, the timer or pause.
Care and cleaning
The glass-ceramic surface is smooth and allows quick everyday cleaning with a damp soft cloth and suitable cleaning products. It is recommended to remove boiled-over liquids and splashes as quickly as possible to prevent stains from setting, and not to use abrasive sponges or sharp tools, which may damage the surface.
The extractor filters need regular maintenance, especially when using recirculation mode, to maintain efficient air cleaning and keep the appliance reliable in the long term. The frequency of cleaning or replacing the filters depends on the intensity of use and the specific filter types, so the recommendations in the manufacturer’s user and maintenance manual should be followed.
When to choose the ELICA NikolaTesla Switch Glow RAW BR/A/83
The built-in induction hob with extractor ELICA NikolaTesla Switch Glow RAW BR/A/83 suits a user who wants to combine a hob and fume extraction in one appliance without a separate hanging extractor. A++ energy efficiency, airflow of up to 620 m³/h, four induction zones with two Bridge connection zones and convenient touch control offer a balance between performance and convenience. If the aim is to create a modern, visually clean and high-quality space-saving solution for both a straight worktop and a kitchen island, this model is a choice with strong functionality and design.




Reviews
There are no reviews yet.