Description
Clean air in a small and medium-sized kitchen with the built-in cooker hood Elica ERA S IX/A/52
Elica ERA S IX/A/52 is a built-in cooker hood installed in a cabinet, which fits a standard 60 cm upper kitchen cabinet and helps keep the air fresher while cooking. The stainless steel front edge, in a neutral silver tone, blends into modern kitchens, and the efficient motor provides an airflow of 236–428 m³/h, which is suitable for small and medium-sized kitchens.
Main features
- Built-in solution for a 60 cm cabinet – the cooker hood is installed inside the upper kitchen cabinet, only a discreet metal edge remains visible and the uniform line of the kitchen furniture is not disturbed.
- Airflow 236–428 m³/h – the multi-speed operating mode allows you to adjust the extraction power to the intensity of cooking and the size of the kitchen.
- Energy class B – balanced energy consumption helps keep running costs at a reasonable level in everyday use.
- LED lighting – the built-in LED lights illuminate the cooking surface evenly while consuming little energy.
- Ø125 mm connection pipe – the standard pipe diameter makes it easier to connect to an existing ventilation duct.
- Mechanical rotary knob – simple and reliable control makes it possible to switch on quickly, select a suitable speed and control the lighting.
- Solution designed for extraction – the cooker hood is designed to work with extraction, carrying moist, odour-laden air out through the ventilation duct.
- Carbon filter CFC0141571 as an optional accessory – a separately purchased carbon filter is suitable for the appliance and helps reduce odours in situations where the extraction solution is not possible or is limited.
Compatibility and accessories
Elica ERA S IX/A/52 is intended for installation in a standard 60 cm wide upper kitchen cabinet, where the width of the cooker hood itself is about 53.5 cm and the depth 30 cm. Before installation, it is worth checking the internal dimensions of the cabinet and comparing them with the manufacturer’s installation drawing, to ensure sufficient space for the appliance and the correct air duct connection. A standard Ø125 mm ventilation pipe is used for extraction.
The model is factory-set to work with extraction, but the suitable CFC0141571 carbon filter is available for it as an optional accessory. This filter is used when the connection to the ventilation duct is limited or missing and it is necessary to reduce cooking odours before the air is returned to the room, according to the manufacturer’s instructions. The carbon filter is not usually included and must be purchased separately.
Use and maintenance
The cooker hood is controlled with a rotary knob, from which you can select different extraction speeds as needed and switch on the LED lighting. The lower power level is suitable for everyday cooking, while the stronger mode helps cope with intensive frying and stronger odours.
The appliance is equipped with grease filtration, which traps grease in the air to protect both the inside of the cooker hood and the ventilation duct. It is recommended to remove and clean the metal grease filters regularly according to the manufacturer’s instructions. They can usually be washed by hand with warm water and washing-up liquid, and in some cases also in a dishwasher. If the carbon filter CFC0141571 is in use, it should be replaced periodically, depending on how often it is used and the load in the kitchen.
Installation and use
To ensure safe and correct operation, it is recommended to leave the installation to a qualified installer. The cooker hood is fixed to the structure of the upper kitchen cabinet and connected to a Ø125 mm ventilation pipe according to the manufacturer’s diagram. The correct installation height above the hob, sealed air ducts and sufficient fresh air supply ensure efficient and quieter operation of the appliance.
After installation, everyday use is simple – before cooking, switch on a suitable extraction speed so that steam and odours start to be removed immediately, and leave the cooker hood running for a few more minutes after switching off the hob, so that the room stays airy. The light can also be used separately to illuminate the kitchen work area.
Included in the set
The set includes the built-in cooker hood Elica ERA S IX/A/52 together with a grease filter that provides the necessary air cleaning and the fixings specified by the manufacturer. The carbon filter CFC0141571 is generally not part of the standard equipment and must be purchased separately if it is needed for a specific installation solution.
When to choose the Elica ERA S IX/A/52 cooker hood?
Elica ERA S IX/A/52 is a good choice if you need a built-in cooker hood for a 60 cm cabinet that offers decent extraction power while remaining visually unobtrusive. Energy-efficient LED lighting, energy class B and mechanical control create a practical solution for everyday use in a small and medium-sized kitchen.
If you are looking for a cooker hood with extraction and a stainless steel finish, and want the option of also using the carbon filter CFC0141571, this model fits well into a unified kitchen furniture solution. By choosing Elica ERA S IX/A/52, you get a built-in appliance that helps keep the kitchen air cleaner and the work area well lit.




Reviews
There are no reviews yet.