Cooker hood accessories
Cooker hood accessories: charcoal filter, ducting and recirculation kit
Here you will find cooker hood spare parts and fitting accessories: charcoal filters, recirculation kits, ducting with adapters, chimney extensions, motors, lights and remote controls. Most of the range is charcoal filters for Faber, Elica and Electrolux hoods. Two things decide the purchase: whether the hood works in recirculation or extraction mode, and which model or pipe diameter the accessory is intended for.
Charcoal filter: choose by hood model
A charcoal filter, also called an odour filter, is needed when the hood cleans the air and blows it back into the kitchen. Filters are manufacturer-specific, so check the model or product code on the hood’s data plate and compare it with the models listed in the product name. A standard charcoal filter is replaced about every 3-6 months, while a long-life washable filter can be cleaned and used for several years.
Recirculation kit: when the duct cannot be taken outside
A recirculation kit converts an extraction hood into a recirculation hood. It contains charcoal filters and, if needed, an air director that guides the purified air back into the room through the chimney cover. It suits a flat where the hood cannot be connected to a ventilation shaft.
Ducting, adapter and non-return valve
An extraction hood needs ducting whose diameter matches the hood’s outlet opening, the most common being 100, 125 and 150 mm. Every 90° bend and narrowing adapter reduces airflow and raises noise, so keep the duct short. A non-return valve keeps outside air and smells from the shaft out of the kitchen.
Chimney extension, motor and light
A chimney extension covers the duct under a high ceiling. You find the length you need by measuring the gap from the top edge of the hood’s chimney cover to the ceiling; the lower edge of the hood usually sits 65-75 cm above the hob, according to the manufacturer’s instructions. An external motor is fitted on the roof or wall and is only suitable for a hood designed for it. You can find the hoods themselves in the Wall hoods, Built-in cooker hoods and Island hoods listings.
Frequently asked questions
The hood model and product code are on the data plate, which is usually located behind the grease filter. The product name lists the models the filter fits. The hood’s user manual also gives the original filter code.
A standard charcoal filter is replaced about every 3-6 months, more often if you cook every day. Many hoods show when it is time to change the filter with an indicator light.
A washable, or regenerable, charcoal filter is cleaned in the dishwasher and dried in the oven according to the manufacturer’s instructions. A standard charcoal filter is replaced with a new one.
Wash a metal grease filter about once a month in the dishwasher or in hot water with dishwashing liquid. A clean grease filter also keeps the charcoal filter working properly for longer.
The most common diameters are 100, 125 and 150 mm, and the exact size is given in the hood’s installation manual. For a narrower duct you need an adapter, and the hood delivers full performance when the duct diameter matches the outlet opening.
-
109,00 €
- Product type
- Circulation kit, Installation kit
-
22,43 €
- Product type
- Odour filter (carbon filter)
-
29,39 €
- Product type
- Odour filter (carbon filter)
-
115,00 €
-
79,00 €
-
149,00 €
-
20,25 €
-
-
23,06 €
- Product type
- Odour filter (carbon filter)
-
22,21 €
- Product type
- Odour filter (carbon filter)
-
14,99 €
- Product type
- Odour filter (carbon filter)
-
-
-
-
-
40,30 €
- Product type
- Air duct or connector
-
-
-
-
110,16 €
-
189,00 €
- Product type
- Chimney extension or cover
-
1499,00 €
- Product type
- Motor
-
249,00 €
- Product type
- Chimney extension or cover
-
All products shown.
Best sellers
-
-
45,76 €
- Product type
- Odour filter (carbon filter)