Description
Telescopic cooker hood with two motors and three speeds
The telescopic cooker hood CATA TFH 5250 X is fitted under a kitchen cabinet; it is 50 cm wide, 28 cm deep and 17.5 cm high. The front panel pulls out of the hood by up to 155 mm. The airflow is 175–325 m³/h over three speeds, and the noise level is 54 dB at low speed and 68 dB at the highest speed.
Installation under a kitchen cabinet
The hood is fixed to the cabinet with four Ø 6 mm screws, and the spacer closes the gap between the hood and the wall. The lower edge of the hood sits at least 55 cm above an electric hob and at least 65 cm above a gas hob. For extraction, the supplied outlet piece connects to a rigid PVC duct to the outside with a diameter of at least Ø 120 mm. For recirculation, an activated charcoal filter, sold separately, is fitted inside the hood.
Operation with slide switches
To reach the switches, pull the front panel out by more than 50 mm. Switch C-1 turns on the light and switch C-2 starts the motor at low speed. Switch C-3 selects medium or high speed, and the speed can be changed during operation. The indicator light is on while the motor runs.
Cleaning and maintenance
The two metal grease filters are washed once a month in hot water with detergent, or upright in the dishwasher. The activated charcoal filter is replaced every 2 months. If the hood runs for more than 2 hours a day, clean and replace the filters more often. Clean the housing with a liquid, non-corrosive detergent.
In the box
- Telescopic cooker hood CATA TFH 5250 X
- Outlet piece for connecting the duct
- Spacer
- 4 screws Ø 6 mm



Reviews
There are no reviews yet.