Description
Built-in cooker hood for cleaner kitchen air and a uniform design
Elica CT17 C WH/A/52 is a fully integrated cooker hood that is installed in a kitchen cabinet so that only the lower part remains visible. With its white colour and painted steel body, it blends in unnoticed in modern kitchens. A maximum airflow of up to 368 m³/h helps reduce the odours and steam produced during cooking in small and medium-sized kitchens.
Main features
- Fully integrated cooker hood – the hidden installation inside the cabinet keeps the kitchen cabinet façade uniform and creates a discreet look.
- A maximum airflow of up to 368 m³/h and a minimum of 290 m³/h provide effective extraction during everyday cooking.
- The 120 mm air duct connection suits most standard ventilation pipes, allowing extraction through a wall or ceiling.
- Energy-efficient LED lighting illuminates the worktop with an even, cool light, which makes cooking more comfortable.
- Electronic control with several speed settings lets you choose a suitable extraction power according to the amount of steam and odours.
- Removable and washable metal grease filters help trap grease particles and are easy to maintain.
- To reduce odours, the carbon filter CFC0141571 is available as an accessory, which allows the hood to be used in recirculation mode as well.
Compatibility, accessories and maintenance
The Elica CT17 C WH/A/52 is designed to be installed in a standard wall cabinet. The hood body is about 30 cm deep and has a maximum height of about 208 mm, so it is important to make sure that the cabinet has sufficient internal dimensions and that shelves do not get in the way. The standard width of 50 cm usually suits a wall cabinet about 60 cm wide, leaving room on both sides for the cabinet sides and ventilation.
The hood is set at the factory to extraction mode, where the air is led out through a ventilation pipe with a 120 mm diameter. If the kitchen has no option to lead the air out, recirculation mode can be used with the separately sold carbon filter CFC0141571, which helps absorb odours. The carbon filter is a consumable part that must be replaced periodically depending on how often it is used.
Maintenance is based on simple regular cleaning. The removable metal grease filters should be taken out of the cabinet from time to time and washed either by hand with warm water and dishwashing liquid or in a dishwasher according to the manufacturer’s instructions. It is recommended to clean the visible surfaces of the hood with a soft damp cloth, avoiding abrasive sponges and strong chemicals, in order to preserve the finish of the painted steel.
Installation and use
When installing the hood, the manufacturer’s instructions and the relevant safety requirements must be followed. The electrical connection must be made by a competent electrician. The general installation logic is as follows.
- Check the internal dimensions of the wall cabinet and make sure that the body and the 120 mm air duct connection fit in the cabinet together with the ducting.
- Fasten the hood inside the cabinet body at the fixing points given in the manufacturer’s manual, so that the lower surface stays level with the bottom of the cabinet.
- Connect the ventilation pipe to the extraction outlet or set the appliance to recirculation mode with a suitable carbon filter CFC0141571.
- Have the electrical connection made by a qualified electrician, then check all operating modes and the lighting of the hood.
- When using it, switch the hood on shortly before cooking, choose a suitable extraction speed and leave the appliance running for a few minutes after turning off the hob, to remove residue and odours.
When to choose the Elica CT17 C WH/A/52 built-in cooker hood?
The Elica CT17 C WH/A/52 is suitable if you want a discreet solution inside the cabinet that does not spoil the uniform line of the kitchen but still offers decent extraction power in a smaller or medium-sized kitchen. LED lighting, electronic control and washable grease filters make everyday use and maintenance simple. The carbon filter CFC0141571, available as an accessory, allows you to choose flexibly between extraction and recirculation mode according to the ventilation options of the kitchen.


Reviews
There are no reviews yet.