Description
Built-in cooker hood for reducing cooking odours in small and medium-sized kitchens
The stainless steel built-in cooker hood ELICA CT17 C IX/A/52 is designed to be installed inside kitchen furniture to keep the area around the hob cleaner and to reduce cooking odours and steam. The cooker hood works with extraction through a ventilation duct, and thanks to its compact width it suits small and medium-sized kitchens well, where a modest, unobtrusive solution is preferred.
Main features
- Built-in design – the cooker hood is designed to be built into a kitchen cabinet, leaving the area around the worktop visually uniform and saving space in a lower kitchen.
- 50 cm standard width – suits a standard 50 cm wide kitchen unit, which makes planning and fitting with existing furniture easier.
- Stainless steel and silver finish – a durable material that is easy to clean and goes with many modern kitchen appliances and metal-tone fittings.
- Duct out solution – the air is led out through a ventilation duct, which helps to remove moisture and hot steam from the kitchen more effectively.
- 120 mm extraction duct connection – a fixed duct diameter makes it easier to choose a suitable ventilation duct and accessories.
- LED lighting – integrated LED lamps give the hob an even and energy-saving light, which improves visibility while cooking.
- Electronic control – control is electronic, which makes it convenient to choose a suitable operating mode according to the intensity of cooking.
- 290–368 m³/h airflow – extraction power suitable for a small and medium-sized kitchen helps to remove steam and odours produced during everyday cooking more quickly.
- Noise level 62–67 dB – works at an audible level, but one comparable to the usual background noise in a kitchen, which is typical for built-in cooker hoods in this class.
- Energy label D – annual energy consumption is 71 kWh, which gives an idea of the appliance’s average energy use and helps to compare it with other models.
Compatibility, accessories and maintenance
The ELICA CT17 C IX/A/52 is a built-in cooker hood that fits a 50 cm wide kitchen furniture unit and is connected via a 120 mm ventilation duct. Before installation, make sure that the cabinet has enough room for both the appliance and the ducting, and that the position of the ventilation outlet matches the kitchen layout.
For better odour reduction, the model is compatible with the carbon filter CFC0141571. This carbon filter is an accessory purchased separately, used mainly when the extraction cannot be connected directly to the ventilation system or when you want additional odour filtering. How often the carbon filter is used and replaced depends on cooking habits, and the manufacturer’s user manual gives more precise guidance on this.
Regular maintenance ensures better performance and a longer life for the cooker hood. It is recommended to clean the surfaces of the body and visible parts from time to time with a suitable gentle cleaning agent, and to check the filters intended for trapping grease and odours according to the manufacturer’s instructions, cleaning or replacing them when necessary.
Installation and use
The cooker hood is designed to be installed in a kitchen cabinet, following the dimensions and fixing diagram given by the manufacturer. During installation, the appliance must be connected to the kitchen ventilation system via a 120 mm extraction duct or a suitable adapter, and you must make sure that the airflow is not obstructed. To ensure safe and correct operation, it is recommended that the electrical connection is made by a qualified specialist and that the installation height above the hob matches the recommendations given in the instructions. Everyday use is limited to selecting a suitable power level and switching the lighting on and off as needed.
Why choose the ELICA CT17 C IX/A/52 built-in cooker hood
If you are looking for a kitchen solution that combines a discreet built-in design, the durability of stainless steel and LED lighting, the ELICA CT17 C IX/A/52 is a practical choice. The 290–368 m³/h airflow, the 120 mm extraction duct connection and the option of using the suitable carbon filter CFC0141571 help to keep the kitchen air fresher during both everyday cooking and more intensive baking and roasting.


Reviews
There are no reviews yet.