Description
A built-in cooker hood that keeps kitchen steam and odours under control
ELICA ELITE 35 BL/A/60 GFB is a 60 cm wide built-in pull-out cooker hood that blends into the kitchen cabinet and keeps the worktop visually clean. Extraction power of up to 640 m³/h helps remove steam and cooking odours in small and medium-sized kitchens, while the A energy efficiency class keeps energy consumption at a moderate level. The cooker hood can be used both in extraction mode through a ventilation duct and in air recirculation mode with the additional carbon filter CFC0140075 if there is no ventilation shaft.
Main features
- Built-in, pull-out 60 cm cooker hood that keeps the line of the kitchen furniture even and the visible part discreet.
- Up to 640 m³/h airflow in intensive mode, which helps remove steam and stronger odours quickly.
- A energy efficiency class reduces energy consumption with regular use.
- Noise level of about 46 to 67 dB depending on the selected speed, providing a good balance between performance and comfort.
- LED lighting illuminates the hob evenly and uses little energy.
- Air extraction through an air duct with a diameter of 150 mm, which suits most standard ventilation openings.
- Option to use air recirculation mode with the separately purchased carbon filter CFC0140075 if there is no ventilation shaft.
- Black stainless finish that suits modern kitchen design and is easy to clean.
Compatibility, maintenance and accessories
This model is designed to be installed in a wall cabinet above the hob and fits a standard 60 cm wide cabinet. The actual width is approximately 59.7 cm and the depth about 28.5 cm, and according to the manufacturer the installation height is in the range of 396 to 436 mm, which suits typical kitchen cabinet dimensions. The cooker hood works in extraction mode by default and is connected to a ventilation duct with a diameter of 150 mm, so it is a good solution if the kitchen has a suitable extraction opening.
Trouble-free operation of the cooker hood requires regular maintenance. The removable grease filters must be cleaned according to the manufacturer’s instructions so that the extraction power is preserved and the appliance does not become too noisy. When cleaning the housing and the front panel, it is worth using a soft cloth and gentle cleaning products so that the black stainless surface stays presentable for longer. It is advisable to start the cooker hood at a lower speed a little before cooking begins and to increase the power if necessary, which helps keep both odours and steam under better control.
If there is no ventilation shaft, the appliance can be used in air recirculation mode. This requires the separately purchased carbon filter CFC0140075, which binds odours before the air is returned to the room. The carbon filter must be replaced periodically according to the recommendations in the user manual. The cooker hood is controlled directly on the appliance via electronic buttons or a button panel, and the model has no Wi Fi or wireless pairing with the hob.
Installation and use
During installation, the manufacturer’s installation instructions and the kitchen ventilation requirements must be followed. The cooker hood is fixed in the wall cabinet, connected to an air duct with a diameter of 150 mm and then set up according to the selected operating mode. If you plan to use air recirculation, the CFC0140075 carbon filter is installed additionally according to the instructions.
- Measure the kitchen cabinet and make sure it suits a 60 cm built-in cooker hood and takes into account the depth and height of the appliance.
- Install the cooker hood in the cabinet at the fixing points provided by the manufacturer and connect it to the 150 mm ventilation duct or prepare for air recirculation according to the instructions.
- In everyday use, pull out the front panel, switch on the LED lighting and select a suitable extraction speed according to the intensity of cooking.
- After cooking, let the cooker hood keep running for a short time so that residual moisture and odours can leave the kitchen.
Included
- ELICA ELITE 35 BL/A/60 GFB cooker hood with built-in housing
- Integrated LED lighting
- Removable grease filters
- Built-in non-return valve, which helps reduce backflow of air from the ventilation duct
When to choose the ELICA ELITE 35 BL/A/60 GFB cooker hood
This model is a good choice if you are looking for a built-in 60 cm cooker hood that stays hidden in the cabinets but can remove steam and odours with an airflow of up to 640 m³/h. The A energy efficiency class and LED lighting help keep running costs under control, while the black stainless finish and pull-out construction create a uniform and modern look. If you need the option to use the appliance without a ventilation shaft as well, you can add the carbon filter CFC0140075 and switch the cooker hood to air recirculation mode.



Reviews
There are no reviews yet.