Description
Coffee grinder with flat burrs for filter coffee
The Fellow Ode Gen 2 flat burr coffee grinder grinds one hopper load at a time: with the lid on, the hopper holds up to 100 g of coffee beans. The burrs are made of stainless steel and the body of aluminium. Thanks to the antistatic design, according to the manufacturer, about 0.1 g of ground coffee remains in the grinder.
Grind size and brewing methods
The grind size is selected with the dial on the front, whose scale runs from 1, the finest, to 11, the coarsest. Turning it clockwise makes the grind coarser and turning it anticlockwise makes it finer. Before changing the setting, let the grinder run so that any residue between the burrs is removed.
| Brewing method | Recommended setting |
|---|---|
| AeroPress | 3–6 |
| Pour-over filter coffee | 4–8 |
| Electric coffee maker | 7–9 |
| French press | 8–10 |
| Cold brew coffee | 9–11 |
Use
Remove the hopper lid, pour in the coffee beans and put the lid back on. Make sure the magnetically aligned container is fully under the outlet, and press the power button. If you hold the button down for more than 1.5 seconds, the grinder keeps grinding until you release it. Before removing the container, tap the metal tapper so that coffee left in the outlet falls into the container.
Cleaning and maintenance
In daily use, clean the burrs at least every 3 months with a stiff brush or grinder cleaning tablets. You can reach the burrs by removing the front panel, unscrewing the 4 larger screws with a Phillips screwdriver and pulling out the grind-size dial. The burrs must not be washed with water. Clean the container with a soft cloth and warm soapy water and dry it. Wipe the body and hopper with a soft damp cloth. No part may be washed in a dishwasher.
Included
- Coffee grinder with hopper and lid
- Cleaning brush
- Magnetically aligned container with lid
- Safety and maintenance guide


















Reviews
There are no reviews yet.