Description
Manual coffee grinder with Nitro Blade grinding burrs
Manual coffee grinder with steel grinding burrs Comandante C40 MK4 grinds beans in a conical Nitro Blade burr set. The ring and the cone are cut from high-alloy, high-nitrogen stainless steel. The body, shaft and crank are stainless steel, and the shaft rests on 2 rubber-protected micro ball bearings. The body is coated in orange (Sunset) powder coating.
Choosing the grind setting
The grind setting is changed with the three-armed star knob on the underside of the grinder: turning it clockwise makes the grind finer, and turning it anticlockwise makes it coarser. Each setting locks with a click, and counting starts from the zero position, where the grinding burrs touch. At the factory the grinder is set to 24 clicks. The click scale ranges from fine grind for Turkish coffee and espresso to French press and cold brew coffee.
Use
To add beans, remove the magnetically attached crank, fill the grinder and put the crank back on. When changing the setting, hold the crank and the body still with one hand and turn the star knob with the other. The oak wood knob attaches to the crank with a click and can be removed.
Cleaning and maintenance
Clean the grinding burrs and the inside of the grinder with a brush, and keep the grinding burrs dry. To remove the cone, turn the star knob fully anticlockwise, but do not loosen the 3 fixing screws around the grinding burr. Do not immerse the grinder in water or wash it in a dishwasher. Containers can be cleaned with hot water.
Included
- Coffee grinder with Nitro Blade grinding burrs
- Oak wood crank with knob
- Brown glass container with lid
- Transparent polymer container
- Comandante wrist strap
- Merino wool felt cloth









Reviews
There are no reviews yet.