Description
Corded robotic pool cleaner for floor, walls and waterline
The corded robotic pool cleaner WYBOT M1C runs on mains power and is made for pools up to 130 m². Plug the power box into a socket and the robot starts cleaning without any prior setup.

Floor, walls, steps and waterline with one robot
The robot climbs the pool walls and cleans the steps and the waterline as well as the floor. One button press sends the robot to the waterline. The multi-level filter traps leaves, sand and sediment, filtering about 15 m³ of water per hour.




Route planning with gyroscope and infrared sensor
A 6-axis gyroscope and an infrared sensor map the pool, so the robot chooses its cleaning route itself. The M1C works in round, polygonal and kidney-shaped pools.


Cleaning modes and weekly schedule in the app
In the mobile app you choose four cleaning modes: full pool, floor only, walls only or waterline only. As the movement pattern you can pick a star, S-shaped, cross, H-shaped or N-shaped pattern or a regular route. In the weekly schedule you set a start time for each day and a cycle length of 1, 2 or 3 hours. Manual control steers the robot to a spot that needs more thorough cleaning, and the app also shows the water temperature.


Protection against overvoltage, overload and short circuit
The protection system guards the robot against overvoltage, current overload and short circuit. The robot is waterproof to IPX8 and the power box to IPX5.

Use and storage
The robot works at water temperatures of 10–35 °C. Store the robot at 5–35 °C and a relative humidity of up to 75%.
In the box
- Robotic pool cleaner WYBOT M1C, 1 pc
- Power box
- Power cable, 18 m
- Safety rope
- User manual
- Quick guide




Reviews
There are no reviews yet.