Description
Solar panel for charging a power station when travelling and for backup power
The bifacial foldable solar panel FOSSIBOT SP400 Pro delivers 400 W peak power under standard test conditions, and its monocrystalline cells reach up to 25% efficiency according to the manufacturer. Unfolded, the four-section panel measures 2765 × 790 × 21.4 mm.

The rear side collects light reflected from the ground
The panel collects light on both sides: the front from direct sunlight and the rear from rays reflected off the ground, which according to the manufacturer adds 10–15% light to the cells. The gain is largest when the surroundings reflect light well.

Connecting to a power station via MC4 connectors
The panel has standard MC4 connectors, and the included MC4–XT60 charging cable connects it to a power station’s XT60 input. To check a power station’s input, the panel’s maximum power voltage is 32.6 V and current 12.3 A, open-circuit voltage 39.1 V and short-circuit current 12.5 A.


Aluminium frame and corner guards for frequent carrying
The panel’s aluminium frame and plastic corner guards protect the edges from knocks and ground contact. Folded, the panel weighs 9 kg and fits in the included carry bag.

Bypass diodes for partial shading
When a tree or vehicle shades part of the panel, bypass diodes route current around the shaded cells and reduce the risk of them overheating.

Use on grass, gravel and uneven ground
The fixed stand holds the panel at 35° and keeps it stable on uneven ground. The IP67 rating and sealed connectors make the panel dust-tight and protect it against temporary immersion. The panel operates at −10 to 70 °C.

In the box
- Solar panel FOSSIBOT SP400 Pro, 1 pc
- Carry bag
- MC4–XT60 charging cable
- User manual




Reviews
There are no reviews yet.