Skip to content

Shipping country

Clearance -15%

Bidirectional smart energy meter with Wi‑Fi and CT clamp AVATTO WPM16-2, 100–240 V AC, 0.2–80 A, 2-channel, import/export, Tuya/Smart Life

  • Brand:
  • Product code: IP079252
  • EAN: 6976037362296

A two-channel device that measures both grid consumption and PV generation, suitable for homes and systems with an inverter. Through Wi‑Fi, in the Tuya or Smart Life app you can see real-time voltage, current and power data. The CT clamp allows installation without cutting any wires. Thresholds warn of anomalies.

17,95 €

Out of stock This product is out of stock or sold out.

Tell me when it is back

Leave your address and we write once, when it is back in stock.

We use the address only for this one e-mail. You confirm the request first with the link we send you. An unconfirmed request is deleted after 30 days, a finished one after 90.

Category:

Description

The Avatto WPM16-2 bidirectional Wi‑Fi energy meter with Tuya/Smart Life makes consumption and production clearly visible

The Avatto WPM16-2 is a compact bidirectional energy meter that measures both consumption from the grid and the production of a PV system and shows the data in real time. The device suits home electrical panels and solar energy installations where you need to monitor the movement of energy between the grid and the inverter and keep costs under control.

Main features

  • Bidirectional measurement monitors both grid import and PV export, to understand energy levels in both directions.
  • The 0.2-80 A range of the two measuring channels covers most home and smaller PV applications.
  • The 100-240 V AC supply range for 50 or 60 Hz networks, operating temperature -10 to 50 °C.
  • The Tuya/Smart Life app gives access to graphs and notifications without using a separate gateway.
  • Real-time metrics voltage, current and power with hourly, daily, monthly and yearly views and summaries of quantities.
  • Power thresholds: setting a minimum and maximum limit helps quickly notice unusual consumption or overproduction.
  • The CT clamp allows installation without breaking the wires, the module fits into a typical distribution panel.
  • A correct reading is ensured from a load of ~10 W, with smaller loads the results may be inaccurate.

A smart bidirectional energy meter with a CT sensor on an orange background

The Avatto WPM16-2 smart bidirectional energy meter with Wi‑Fi support

This compact module measures electricity consumption and production and sends the data to a phone via Wi‑Fi. It suits both home networks and solar energy installations where you want to get a precise overview of the movement of energy.

A smart bidirectional energy meter with a CT sensor, next to it a smartphone with a consumption graph

Bidirectional energy measurement

The two-channel solution measures separately the energy entering the grid and the production leaving the PV system. This lets you keep import and export in balance and plan consumption according to the operating mode of the inverter and the grid conditions.

A smart bidirectional energy meter and a CT sensor on a wall, next to it a smartphone held in a hand

Data in the app

The device connects to the home Wi‑Fi network and works with the Tuya Smart or Smart Life app. From the app you can see the instantaneous values of voltage, current and power and hourly, daily, monthly and yearly graphs, which help manage consumption and production more knowledgeably.

A smart bidirectional energy meter and a CT sensor in a distribution panel

Safe and easy installation

The CT sensor included in the set attaches around the cable with a clamp, so there is no need to cut the wires. The module is compact and suits installation on a standard DIN area or in a distribution panel. The condition for accurate measurement is a load from about 10 W.

A smart bidirectional energy meter and a CT sensor on a wooden background

Customisable settings

In the app you can set minimum and maximum power thresholds to react to deviations. This helps both in protecting devices and in monitoring PV performance, giving a clear overview of changes in consumption and production.

Compatibility and usage scenarios

The Avatto WPM16-2 works directly with the home Wi‑Fi network and is compatible with the Tuya Smart and Smart Life apps. A separate gateway is not needed. The app shows real-time metrics and historical graphs, which helps assess load patterns and keep electricity use transparent.

The solution with two measuring channels suits systems that have both grid import and PV export. It is especially practical in installations with inverters, where it is important to monitor the direction and volume of the energy movement.

A prerequisite for accurate measurement is a load of at least approximately 10 W. Installation and connections should be made according to the manufacturer’s diagram and the applicable safety requirements.

Installation and usage recommendations

A qualified electrician should switch off the power before installation. Install the module in the distribution panel, fix the CT clamp around the corresponding wire so that it matches the current direction shown on the CT marking, and connect the power according to the diagram. After the initial setup, connect the device to the Wi‑Fi network in the Tuya Smart or Smart Life app, check the display of the metrics and, if necessary, set the power thresholds. During operation, keep the device in a dry environment and in the range of -10 to 50 °C.

Included in the set

  • Avatto WPM16-2 energy meter module
  • CT sensor with a clamp

Make the energy flow visible and make informed decisions

If you need a clear overview of where energy goes and when costs grow, the Avatto WPM16-2 offers real-time visibility and the option of setting warning thresholds. By ordering you get a practical bidirectional measurement solution that helps optimise consumption and monitor the performance of a PV system without complicated installation.

Additional information

Weight 0,160 kg
Category

Switches

App

Tuya Smart Life, Tuya Smart, Smart Life

Supply voltage

100–240 V AC, 50/60 Hz

Current range

0.2–80 A

Operating temperature

-10 – 50 °C

Dimensions

38.5 × 38.5 × 19 mm (module), 40 × 25.6 mm (CT)

Number of measurement channels

2

Measurement direction

Two-way

Sensor type

CT clamp

Warranty

12 months

Model

WPM16-2

Minimum load

>10 W

Connectivity

Wi-Fi

Features

Two-way measurement

  • Only a customer who bought the product from us can review it: signed in, or through the link in the e-mail we send after the order. We check the purchase against the order.
  • We read every review before it is published (rules below).
  • The average rating is the plain average of all published ratings.
  • The buyer receives loyalty points for an approved review, whatever its rating or content. Text and a photo earn extra points. Reviews that earned points are marked.

  1. Write about the product and your own experience with it.
  2. A review may not contain personal data, links or advertising.
  3. Offensive or unlawful content is not allowed.
  4. Whether a review is published never depends on its rating.
  5. A photo must be taken by you, and the product must be clearly visible on it.
  6. A photo may not show people who can be recognised, or personal data such as documents, addresses or number plates.
  7. If we do not publish a photo, we send the reviewer the reason by e-mail.

Reviews

There are no reviews yet.

Bought this product from us? Sign in, or open the link in the e-mail we send after the order.

Similar products available

Goes well together

More from the same brand

See all Avatto products (73)

See also:

Newsletter

New collections first

Only useful and necessary news: new products, items back in stock and member offers. No spam.

Create account

A link for setting your password will be sent to your e-mail address.

We send only useful and necessary information, and you can unsubscribe with one click. You confirm by e-mail before the first letter.

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Menu

Shipping country

AssistantBETA

AI helper

Hi!

I am your AI assistant! Ask me freely, in your own words, what you would like to find or what more information you need, and I will gladly help you!

You can also choose one of these:

    Cart

    Your cart is empty.