Description
Full-motion TV wall mount with a single articulating arm
The single-arm TV wall mount Gembird WM-55ST-03 holds a 32–55 inch TV weighing up to 35 kg with a VESA pattern from 75 × 75 to 400 × 400 mm. The arm extends 105–429 mm from the wall, the TV swivels up to 90° to either side and tilts from +5° to −18°. The mount is designed for a solid wall, a built-in spirit level helps set the plate straight and cables can be gathered along the arm.
The VESA mount size decides which TV fits
VESA mount is the Video Electronics Standards Association standard that places threaded holes at a fixed spacing on the back of a flat TV so it can be attached to a wall mount or stand. The spacing between hole centres is measured in millimetres horizontally and vertically, and patterns of 200 × 200 mm and larger use M6 or M8 bolts. The WM-55ST-03 fits 13 VESA patterns and M6 and M8 bolts are included.
Installation
Mark level holes using the wall plate, drill 60 mm deep holes with a 10 mm bit and fix the plate with the wall plugs, screws and washers. Screw the two TV brackets to the back of the TV, with spacers if needed, and hang the TV on the plate with two people. Fasten the cables to the arm with cable ties, and if the TV does not hold its position, tighten the joint knob.
In the box
- TV wall mount Gembird WM-55ST-03, 1 pc
- TV brackets, 2 pcs
- cable ties, 2 pcs
- M6 × 30 mm and M8 × 30 mm bolts, 4 pcs each
- D8 washers and Ø15 × Ø8 × 15 mm spacers, 4 pcs each
- ST6.3 × 55 mm wall screws, Ø10 × 45 mm wall plugs and D6 washers, 4 pcs each
- user manual


Reviews
There are no reviews yet.