Description
Table lamp with a stoneware base
The base of the table lamp is made of stoneware and is green, with lighter and darker patches alternating on its glossy surface. The base is low and round: a wider cylindrical part rests on a narrower foot. The tall cylindrical lampshade is green and light on the inside. The lamp is intended for a table or a low cabinet, for example next to a sofa.
Light and light source
The lamp holder has an E27 socket and takes one light source of up to 40 W. The light source is not included. The green lampshade lets the light of the lit light source through. The lamp is switched on and off with the cord switch.
Dimensions and installation
The lamp is 60 cm high and its diameter is 30 cm. The lamp weighs 2.65 kg. The 150 cm power cord reaches a socket that is up to one and a half metres away from the lamp. The protection rating is IP20: the luminaire is not protected against water and is intended for dry indoor spaces.
Assembly
The lampshade and the base are delivered separately. Unscrew the ring from the lamp holder, place the lampshade on the holder and screw the ring back on. Then screw the light source into the socket.
Care
Wipe off dust with a soft dry cloth. Remove grease stains with a soft cloth dampened in lukewarm water below 50 °C and wrung out well, and a mild cleaning agent. Do not use abrasive or solvent-based cleaning agents, and switch the lamp on only once the water has completely evaporated. The power cord cannot be replaced: if the cord is damaged, the lamp must be taken out of use.







Reviews
There are no reviews yet.