Description
The Yeelight MercuryE C300 ceiling lamp with motion and light sensor makes dark corridors safely bright
The Yeelight MercuryE C300 ceiling lamp with motion and light sensor switches itself on automatically in the dusk when it detects movement or presence, and goes out when the activity ends. This reduces the time the light burns needlessly, improves the visibility of the walking route, and savings arise without separate settings. The neutral 4000K light is eye-friendly and flicker-free, and the IP44 protection class allows use both indoors and in outdoor areas under a roof.
Main features
- Automatic switching on and off reacts to movement and presence, putting the light out about 20 s after the activity ends, which helps reduce unnecessary energy use.
- Neutral 4000K light and flicker-free operation ensure visual comfort both in everyday tasks and in rest areas.
- Energy saving of up to 30% comes from the smart automatic mode, which keeps the light off when there is enough natural light.
- IP44 protection against dust and moisture suits a hallway, a stairwell, in front of a garage door or under a canopy.
- Even lighting over an area of up to 10 m² helps cover a typical hallway or a small corridor.
- Long-lasting construction with a lifetime of up to 50,000 h reduces the need for maintenance and replacement.
- The compact size of 300 × 58 mm allows discreet installation on lower ceilings.
- The non-dimmable LED module works on a standard 230 V supply and is not suitable for dimmer switches.
Yeelight MercuryE C300 ceiling lamp with presence sensor
This is a smart ceiling light that combines a motion and light sensor. The lamp reacts to both movement and immobility in low light, switching itself on or off accordingly. It offers natural, flicker-free 4000K light for comfortable use for the eyes, and the IP44 protection allows installation indoors and in outdoor areas under a roof. The automatic mode can bring noticeable energy savings.
Smart lighting with a motion sensor
The lamp uses the Smart Motion & Light Radar solution, which adapts the light depending on your presence and the surrounding light. This adds convenience, improves visibility and helps save energy, because the light does not burn when it is not needed.
Advanced DualSense Auto-Lighting
The light fitting activates on movement but also detects presence. When the ambient light level is below about 40 lx, the lamp switches on automatically and goes out about 20 s after the activity disappears. The detection range is approximately 1-5 m, which suits hallways and stairwell areas well.
Comfortable light
Neutral 4000K light ensures good colour perception and an atmosphere pleasant for the eyes. The light source works flicker-free, which reduces visual fatigue both when going about things at home and at moments of rest.
Strong construction for special conditions
The IP44 protection class keeps out dust, moisture and also insects, so the lamp suits both indoor and covered outdoor uses under a roof. The durable body ensures reliable operation in everyday use and a longer service life.
Energy saving without compromise
Automatic switching on and off reduces consumption by up to 30%, which shows in smaller bills and more efficient use. You get the desired lighting comfort without manual switching.
Compatibility, places of use and care
The lamp works independently and needs no app or gateway. Connect it to a standard 230 V circuit and leave the power switch on, so that the automation can work. It suits hallways, stairwells, storage areas and under a canopy. The recommended lighting area is up to about 10 m²; to cover a longer corridor evenly, use several light fittings.
The light fitting is not dimmable and must not be connected to a dimmer switch. In an outdoor location under a roof, make sure the lamp is protected from direct precipitation and splashing water, as IP44 requires. If a wall switch is used, the automation works only when the switch is in the on position.
For care, switch off the power and clean the body with a soft dry or slightly damp cloth. Avoid abrasive agents. Keep the sensor and the light opening clean so that reliable detection and even light are preserved.
Installation and usage recommendations
Before starting, switch off the power. Fix the mounting plate to the ceiling and connect the wires to the L and N terminals accordingly. Fit the body and make sure the seals are placed correctly. Switch the power on and check operation by walking through the detection area. The best result comes from installation at the centre line of the ceiling at a height of about 2-3 m, avoiding a direct obstruction in front of the sensor. You should avoid connecting to dimmers and frequency converters and installing in places with strong vibration or direct exposure to precipitation.
In the set
- Yeelight MercuryE C300 ceiling lamp YLXDD-0223, white
- User guide and warranty information
Order and make your walking routes automatically lit
If you need a solution that switches on at the right time and saves energy, the Yeelight MercuryE C300 is a practical choice. You get automatic lighting without extra devices and setup, and even neutral light for everyday use. The IP44 protection and durable design help keep maintenance to a minimum and reduce costs in the longer term.

Reviews
There are no reviews yet.