Description
Midea Spare Parts Kit M6/M7/M7Pro/S8+ robot vacuum cleaner spare parts kit
The Midea spare parts kit is designed for regular maintenance of the M6, M7, M7 Pro and S8+ robot vacuum cleaners. The kit contains four side brushes and one cleaning brush, which help maintain the robot’s cleaning performance and ensure effective removal of dust and dirt from walls, corners and around furniture. Original spare parts fit the robot’s attachments and do not change its dimensions or operation.
What is this kit suitable for?
The kit is a suitable choice for a Midea robot vacuum owner whose robot still cleans well, but whose side brushes are worn, bent or frayed. Side brushes are direct wear parts: when the bristles lose stiffness or length, more dirt is left in corners and along the edges of skirting boards, and the robot has to cover the same area more often. Four brushes are enough for two full replacements, which makes this a practical solution for the longer term.
Main features
- Original Midea spare parts – mechanically and functionally compatible with the M6, M7, M7 Pro and S8+ robot vacuum cleaners.
- 4 side brushes included – two pairs, covering several brush replacement periods.
- 1 cleaning brush – designed to remove hair and fibres from the robot’s main brush, side brushes and filter.
- Effective edge and corner cleaning – rotating side brushes guide dirt from walls and along skirting boards into the robot’s suction opening.
- Easy installation – the brushes click onto the underside of the robot, no additional tools are needed.
- No power required – these are passive plastic and bristle elements that do not affect the robot’s energy consumption.
- Small and light packaging – convenient to store together with the robot’s other accessories.
Technical data
- Manufacturer: Midea
- Product name: Spare Parts Kit: 4x Side Brush, 1x Cleaning Brush for M6/M7/M7Pro/S8+
- Included: 4 × side brush, 1 × cleaning brush
- Compatibility: Midea M6, M7, M7 Pro, S8+
- Net weight: 0.02 kg (brushes)
- Gross weight: 0.19 kg (including packaging)
- Package dimensions (approximate): 340 × 144 × 68 mm (L × W × H) – fits in a standard drawer or kitchen cabinet.
- Materials: plastic attachment parts and synthetic bristles; the cleaning brush has a plastic body and fine bristles.
- Electronics / batteries: none.
Compatibility and fit
The kit is officially intended for use with the following Midea robot vacuum cleaners:
- Midea M6
- Midea M7
- Midea M7 Pro
- Midea S8+
Suitability for other models has not been confirmed by the manufacturer. If your robot is one of those listed above, the side brushes in the kit fit directly onto the robot’s side brush posts, and the robot’s height and range of movement do not change – if the device fitted under your sofa or cabinet before, it will still fit there after the new brushes are installed.
Ease of use and maintenance
Replacing the side brushes is simple:
- If necessary, switch off the robot and carefully turn it over.
- Remove the old side brush by pulling it up from its attachment post.
- Align the new brush with the corresponding post and press until it locks in place.
- Make sure the brush rotates freely and does not touch the robot’s body.
For regular maintenance, use the cleaning brush included in the kit – it lets you remove hair and fur from the main brush and between the side brush bristles, and also clean the surface of the dust filter if the manufacturer’s instructions allow it. It is recommended to clean the side brushes at least once a week and replace them every 6–12 months, depending on how often the robot is used.
How does the kit make your life easier?
The side brushes of a Midea robot vacuum bear the basic mechanical load of daily cleaning, so their wear is unavoidable. Fitting a new kit restores the robot’s original cleaning ability, reduces the need for repeated cleaning runs and cuts down the amount of manual touch-up needed in corners and along walls. Using original spare parts helps avoid the risks that come with incompatible third-party brushes and supports the robot’s reliability over the long term.
Usage instructions
Practical tips to make the side brushes of your Midea robot vacuum last longer:
- Clean the side brushes and main brush regularly, especially if you have long-haired pets at home.
- If the bristles have bent, you can soak them briefly in lukewarm water, then dry them completely before refitting them to the robot.
- Do not use strong chemicals or solvents – water and, if needed, a mild soap solution is sufficient.
- Store the spare parts kit in a dry place protected from direct sunlight, so that the plastic and bristles do not age prematurely.
This way, the side brushes of your Midea robot vacuum will keep working effectively, and the robot will continue to clean floors, corners and edges with minimal manual effort.


Reviews
There are no reviews yet.