Description
The Yeelight MercuryE C260 ceiling lamp with presence and light sensor ensures safe and economical motion lighting
The Yeelight MercuryE C260 ceiling lamp with presence and light sensor switches the light on when it is really needed, and puts it out automatically when movement subsides. Neutral, flicker-free 4000 K light ensures visibility that is pleasant for the eyes in a corridor, stairwell or hallway. The IP44 protection class allows it to be used both indoors and in covered outdoor areas, while helping to reduce energy use by up to 30%.
Main features
- Autonomous operation without an app and Wi-Fi connection thanks to Smart Motion & Light Radar technology
- DualSense Auto-Lighting detects both movement and presence in the dusk and keeps the light on for as long as it is needed
- A 1-5 m detection range and a switch-off delay of about 20 s reduce unnecessary burning time
- Flicker-free neutral light of 12 W, 900 lm and 4000 K ensures visual comfort in line with IEEE requirements
- IP44 protection against dust, moisture and also insects suits a corridor, a stairwell and a covered veranda
- Up to 30% energy saving thanks to automatic switching on and off
- 50,000 h expected service life and a durable body for everyday use
- 7 m² of illuminated area in a compact size of 260 × 58 mm
- Limitations: no dimming, and the light source is not replaceable
Yeelight MercuryE C260 ceiling lamp with presence sensor
The MercuryE C260 with a smart motion and light sensor reacts to both movement and the level of ambient light. This means comfortable and safe movement in the dark, without searching for a switch, and lower energy use in everyday operation.
Smart lighting with a motion sensor
Smart Motion & Light Radar adapts the light according to your presence and the brightness of the surroundings. The system ensures that the light comes on with movement in the dusk and stays on for as long as you are on the walking route, providing safety and energy saving.
Enhanced DualSense Auto-Lighting
When the sensor detects movement and the light is below about 40 lux, the lamp switches on automatically. The light goes out after about 20 seconds when the activity ends. The detection range is 1 to 5 metres, which suits corridors and stairwell areas well.
Comfortable and eye-friendly light
Neutral 4000 K light helps preserve the natural tone of the room and suits everyday movement and tasks. The light is flicker-free according to IEEE standards, which reduces eye fatigue.
Durable build
The body with the IP44 protection class is protected against dust, moisture and insects. For this reason, in addition to indoor areas, the lamp also suits covered outdoor conditions, for example by an entrance, on a veranda or in front of a garage.
Energy-saving operation
Automatic switching on and off helps reduce consumption by up to 30 per cent, without you having to compromise on visibility or comfort. The saving comes from the light burning only when it is actually needed.
Compatibility, conditions of use and care
The lamp works independently and needs no app, network or gateway. The system switches the light on only when the light level in the room is low and movement or presence is detected. Switch-off takes place approximately 20 seconds after the activity stops. The model does not support dimming, and the light source is not replaceable.
Thanks to the IP44 protection, it is suitable for use indoors and on covered outdoor surfaces. Installation directly in rain and severe weather should be avoided. For the best result, place the lamp so that the sensor has a clear field of view of the walking route, and avoid obstacles that may hide the sensor.
Maintenance is simple. Before cleaning, switch off the power and wipe the body and the diffuser with a soft dry or slightly dampened cloth. Avoid abrasives and strong chemicals, which may damage the surface.
Installation and practical usage recommendations
Before installation, switch off the power at the electrical panel. Fix the base to the ceiling, connect the wires according to the L and N marking and, if necessary, the protective conductor. Fix the body and check the reliability of operation. Choose a location in a corridor, stairwell or by an entrance so that the sensor covers the main walking path and so that there are no strong light sources nearby that may prevent triggering. Choose the fixing materials according to the base material, for example concrete, plasterboard or wood.
In the set
– Yeelight MercuryE C260 ceiling lamp YLXDD-0222, white
– User and installation guide
A light fitting that works when it is really needed
Choose the Yeelight MercuryE C260 if you need a solution that combines smart automation, flicker-free 4000 K light and the IP44 protection class. The autonomous sensor system ensures visibility at exactly the right moment and helps reduce unnecessary energy use. A practical choice for home corridors, stairwells and covered outdoor areas.

Reviews
There are no reviews yet.