Description
Smart plug for a Z-Wave smart home that shows the load by colour
The smart plug with energy monitoring Nice Plug-Control F switches resistive loads up to 2500 W and measures the active power and energy use of the connected device. It works in a Z-Wave Plus network at 868.4 MHz and needs a Z-Wave controller or hub, which also shows the readings. The dual E/F plug fits both Type E and Type F (Schuko) sockets.
LED ring shows power use
The multi-colour LED ring changes colour with the connected device’s current power. You can change the ring colours in the controller settings or switch the ring off.
Automation and protection
The overload switch turns the device off when the power exceeds your limit between 1 and 3000 W, and above 12 A the plug always switches the load off. After a power cut the plug restores its previous state. Through association groups the plug directly controls up to 10 other Z-Wave devices, for example by rising or falling power, and responds to smoke, carbon monoxide and flood sensor alarms. As a Z-Wave repeater it passes on messages from other devices and supports a security mode with AES-128 encryption.
Adding to the network
Plug the device into a socket near the Z-Wave controller, set the controller to add mode and quickly press the B-button three times. In security mode the plug must be within 2 m of the controller. A green LED ring confirms that the plug has been added. Then plug in the device you want to control and switch it on and off with a single press of the B-button.
In the box
- Smart plug Nice Plug-Control F, 1 pc

Reviews
There are no reviews yet.