Description
Air duct transition for when the duct shape changes
The ELECTROLUX M2CKCF02U is an air duct transition piece that makes it possible to connect a horizontal rectangular duct to a round pipe in a cooker hood or extractor installation. It suits a situation where the existing or chosen air duct section measures 220×90 mm, but the next connection has to go to a Ø150 mm round pipe. This way you can adapt the layout of the air duct without having to redo the whole duct system in one uniform shape. The transition helps keep the connection logical and the installation compact.
Key features
- Horizontal connection solution, suitable for joining duct sections in the same direction.
- Rectangular side 220×90 mm, allows connection to a common rectangular duct.
- Round side Ø150 mm, connects the duct to a round pipe when the shape needs to change in the system.
- Designed for adapting the installation of a cooker hood and extractor air duct, supports combining different components.
- 0.27 kg, a light part that is convenient to handle during installation.
- Makes it possible to create an installation where rectangular and round components are in the same system, helps fit the duct to the space and the existing connections.
Suitability and selection principles
The transition is designed for connecting duct sections when one part is rectangular and the other is round. Suitability is determined by the connection dimensions: the rectangular side measures 220×90 mm and the round side has a diameter of Ø150 mm. If the installation requires a different direction or different dimensions, a connecting part with the same purpose and the corresponding dimensions must be chosen.
The M2CKCF02U is an ELECTROLUX accessory used when building the installation of a cooker hood or extractor air duct. In practical use, the most important thing is that the shape and dimensions of the ducts match the ends of the transition, so that the connection is tight and correct.
Installation and use
Before installation, check that the rectangular duct to be connected measures 220×90 mm and the round pipe has a diameter of Ø150 mm. Place the transition in the horizontal direction so that the rectangular and round ends face the corresponding duct parts. Make sure the transition is connected fully inside or onto the ducts, depending on the type of your duct system, and that the connection stays straight and free of tension during installation.
Why choose the ELECTROLUX M2CKCF02U?
The ELECTROLUX M2CKCF02U is a simple solution when a 220×90 mm rectangular duct needs to be connected to a Ø150 mm round pipe in a cooker hood or extractor air duct. It helps build the installation as a combination of suitable duct sections and adapt the system to the space and connection points.



Reviews
There are no reviews yet.