Description
Wet and dry vacuum cleaner for power tools
The wet and dry vacuum cleaner with socket Einhell TC-VC 3055 SA sucks up both solid debris and liquids. The carpet and floor nozzle is intended for cleaning medium and large surfaces, and the crevice nozzle for corners, edges and hard-to-reach places. The suction hose is 2.5 m long with an inner diameter of 36 mm; the end of the hose can be connected to one or both parts of the two-part extension tube.
Filters and sucking up liquids
The pleated filter installed at the factory is only suitable for dry suction. For fine dry dust, pull a paper dust bag onto the suction inlet inside the tank: the pleated filter then clogs more slowly and the suction power is maintained. For wet suction, pull the foam filter included in the set onto the filter basket instead of the pleated filter. When the tank becomes full while sucking up liquids, the float valve closes the suction and the suction sound becomes louder: then switch off the vacuum cleaner and empty the tank. To open the drain screw, turn it anticlockwise.
Use in automatic mode and as a blower
The switch has three positions: 0 (off), I (normal mode) and AUTO (automatic mode). For automatic mode, connect the power tool’s power cable to the vacuum cleaner’s socket and the suction hose to the tool’s dust extraction opening, then set the switch to AUTO. For blowing, connect the suction hose to the blowing head adapter, with which dust can be blown out of hard-to-reach places. The vacuum cleaner is not intended for commercial, professional or industrial use.
Assembly
Attach 2 wheels and 2 swivel wheels to the tank base, and fix the carrying handle with 2 screws using a screwdriver. The device head is attached to the tank with 2 locking hooks, which must lock properly. The chain attached to the bottom of the tank helps to prevent the build-up of static charge.
Cleaning and maintenance
Before any cleaning work, pull the plug out of the socket. Clean the device head with a damp cloth and a little soap, as cleaning agents and solvents can damage plastic parts. The tank can be cleaned with a damp cloth and soap or under running water. Gently tap the pleated filter and clean it with a fine brush; wash the foam filter under running water with a little soap and let it air dry.
Included in the set
- Carrying handle and 2 fixing screws
- Suction hose
- Two-part extension tube
- Carpet and floor nozzle
- Crevice nozzle
- Adapter
- 2 wheels and 2 swivel wheels
- Pleated filter with cover
- Foam filter
- Paper dust bag
- User manual








Reviews
There are no reviews yet.