Description
Dining chair with an oval upholstered backrest
The oval backrest of the dining chair curves slightly around the back and the seat has a thick rounded edge. The backrest rests on the two rear legs, and behind it there is a curved panel in the same tone as the legs. The four round, downward-tapering legs are joined under the seat with cross supports, and the chair has no armrests. The chair is intended for a dining table in the kitchen, dining room or a dining area in the living room.
Material and finish
The steel legs have a finish resembling dark brown wood. The upholstery is made of polyurethane foam, and plywood is also used in the chair’s construction. The light brown mottled cover fabric is 100% polyester and woven from beige, white and brown threads. The abrasion resistance of the cover fabric is 25,000 Martindale cycles: that is how many rubbing cycles the fabric withstood in the test.
Dimensions
The chair’s width is 52 cm, depth 58 cm and height 77 cm. The seat is 47 cm above the floor and the seat depth is also 47 cm. The chair has been tested for home use and its load capacity is 110 kg. The chair weighs 7.6 kg.
Use and suitability
The chair can also be used at a desk. In the Isola series, the shop also has the same chair with a sand-coloured fabric and legs in a natural wood tone.
Assembly and care
The frame with the backrest and legs is ready on delivery, and the seat is attached to it with four M6 × 65 mm bolts, for which an Allen key is included. Assemble the chair on a soft surface, for example a rug, and tighten the bolts again two weeks after assembly and then every three months. Wipe the fabric with a damp cloth and use only clean water, and remove dust with a vacuum cleaner or a clean soft cloth. Do not use detergents, solvents or other chemicals on the fabric, as they may change the colour of the fabric.










Reviews
There are no reviews yet.