Description
Upholstered dining chair Recco with light brown fabric
The seat and wide backrest of the Recco dining chair without armrests are upholstered and covered in light brown fabric. The backrest is rounded, curves forward at the edges and is attached to two posts that continue upwards from the rear legs. The seat has rounded corners and the legs are dark brown, joined under the seat by a crossing frame. The chair is intended for use at a dining table.
Material and finish
The seat and backrest are covered in 100% polyester fabric, the upholstery filling is polyurethane foam, and the construction also uses metal and plywood. The fabric’s abrasion resistance is 25,000 Martindale cycles: that is how many rubbing cycles the fabric withstood in the test. The fabric is melange, and brown and light threads can be seen on its surface. The metal legs have a dark brown wood-tone finish.
Dimensions
The chair is 53 cm wide, 57 cm deep and 79 cm high, where the depth covers the whole chair including the backrest. The seat height is 48.5 cm. The chair weighs 7.5 kg and its load capacity is 110 kg.
Use and suitability
On the back of the backrest there is a dark brown curved slat, which remains visible when the chair is at the table. The same model is also available in the shop with a sand-coloured fabric.
Delivery and assembly
The frame with the backrest and legs is ready when delivered, and the seat is attached with four bolts (M6 × 65 mm). The bolts and the hex key are included. Assemble the chair on a soft surface, for example a rug, to avoid scratches. Tighten the bolts again two weeks after assembly and then every three months.
Care
Wipe the fabric with a damp cloth and use only clean water. Dust and dirt can be removed with a vacuum cleaner or a clean soft cloth. Do not use detergents, solvents or other chemicals on the fabric, as they may change its colour.









Reviews
There are no reviews yet.