Description
RGB video light with six colour modes and a built-in battery
The RGB video light Godox RS100R is a 100 W COB light whose white light can be set between 1800 and 10,000 K and which can produce any colour hue. Its CRI and TLCI are both approximately 95: the closer the value is to 100, the more accurately the light renders colours.


Colour modes and lighting effects
The MODE button and select dial switch between CCT, HSI, RGBW, X-Y, GEL and FX modes. In CCT mode you set the colour temperature and the green-magenta shift from −100 to +100%; in HSI mode the hue from 0 to 360° and the saturation from 0 to 100%. GEL mode reproduces the colour filters of the R-GEL and L-GEL libraries on a 3200 K or 5600 K base, so gel colours are chosen from the menu. FX mode offers 14 lighting effects, including flash, lightning, candle, fire, fireworks and a police car beacon.

Brightness and dimming
Brightness can be set from 0.0 to 100.0% in 0.1% steps. The dimming curve can be linear, S-curve, exponential or logarithmic, and the smoothing setting selects either ultra-smooth dimming or the fastest response. The colour space can be set to original, corrected, Rec.709 or DCI-P3.
Control by app, NFC and DMX
The Godox Light app for Android and iOS controls the light via Bluetooth from up to 30 m. To add the light to the app, bring the phone close to the NFC area. For a lighting console, the separately sold DMX-C2 adapter adds DMX input and output to the USB-C port; with RDM switched on, the console can set the light’s address and DMX mode.

Battery and charging
The built-in lithium-ion battery has a capacity of 4800 mAh (87.12 Wh) and runs the light at full power for up to 52 minutes. With a PD charger of at least 60 W the battery is fully charged in about 2 hours, and the light can be used while charging.
Mount and accessories
The Godox S-mount at the front takes the supplied lens reflector as well as softboxes, modifiers and projection attachments with the same mount. The AD-E2 holder fixes the light to a stand, and the body also has a 1/4-inch screw hole. The cooling fan can be set to off, auto, medium or high.


Use
On first use, connect the USB-C charging cable: this activates the light and switches it on. After that, a long press of the power button switches the light on and off. To fit the lens reflector, align it with the mount and turn it clockwise; to remove it, hold the mount locking pusher and turn it anticlockwise.
In the box
- Video light Godox RS100R, 1 pc
- Holder AD-E2, 1 pc
- USB-C charging cable, 1 pc
- Lens reflector, 1 pc
- Storage bag, 1 pc
- Instruction manual, 1 pc


Reviews
There are no reviews yet.