Description
TTL camera flash for Sony cameras with built-in Godox X radio
The TTL camera flash Godox iT30Pro S is an on-camera flash for Sony cameras with a guide number of 15 (ISO 100, metres). It measures 65 × 46 × 47 mm, so it fits in a jacket pocket.


TTL, manual and Multi modes set from the touchscreen
In TTL mode the flash fires a pre-flash before the exposure and sets its output from the camera’s metering. You set flash exposure compensation from −3 to +3 and the manual output in one-third steps. To capture the trail of a moving subject, Multi mode fires up to 100 flashes at up to 100 Hz in one exposure. You change settings with the colour touchscreen or the rotary dial.


Godox X radio system controls other flashes
With the built-in Godox X 2.4 GHz radio the iT30Pro S works as both master and receiver. As master it sets the mode and output of groups M, A, B and C from up to about 100 m. To avoid interference you can choose from 32 channels and IDs 01–99. As a receiver it can be fired by, for example, the Godox X3 flash trigger.
High-speed sync and built-in diffuser
High-speed sync (HSS) works up to 1/8000 s, and up to 1/80000 s on Sony cameras with a global shutter. The flash also supports first- and second-curtain sync. The WN switch brings in the built-in diffuser: in W the flash gives more even, softer light at close range, in N the light stays strong at longer distances. A sync cord or trigger connects to the 2.5 mm socket.

Lithium battery charged over USB-C
The built-in 7.4 V, 900 mAh lithium-ion battery gives about 560 full-power flashes according to the maker, and the full-power recycle time is about 1.5 s. You charge it with the supplied USB-C cable from a 5 V, 2 A adapter. The same port is used to update the firmware from a computer. Standby puts the flash to sleep after 90 seconds, and auto power-off can be set to 30, 60 or 90 minutes.

Use
Switch off the flash and the camera before mounting. Slide the flash foot into the camera’s hot shoe until it locks into place. To remove it, hold the release button and slide the flash straight out. Switch on with a long press of the power button and unlock by swiping right on the screen or turning the dial.
Cleaning and care
Clean the flash gently with a dry soft cloth. Clean dirty contacts on the flash and in the camera’s hot shoe with a dry lint-free cloth. For longer storage charge the battery to about 50% and top it up at least every 6 months. You can replace a worn battery yourself by removing the four screws of the bottom cover with a Phillips screwdriver.
In the box
- Camera flash Godox iT30Pro S, 1 pc
- USB-C cable, 1 pc
- Storage pouch, 1 pc
- Instruction manual, 1 pc









Reviews
There are no reviews yet.