Description
Effective reduction of odours and steam in an open kitchen – FABER BEAT X/BK MATT F45/2 island cooker hood
FABER BEAT X/BK MATT F45/2 is a hanging island cooker hood that is especially well suited to open kitchens, where it is important to keep the air as clean as possible even without a separate ventilation duct. The recirculation-type solution uses an activated carbon filter that cleans the air and directs it back into the room, the airflow ranges from 270–580 m³/h, and a booster mode of up to 740 m³/h can be used when needed. A-class energy efficiency, LED lighting and a matt stainless steel finish create a combination that unites functionality and understated design.
Main features
- Hanging island installation, 45 cm wide – a compact solution above a kitchen island, where the cooker hood is also a visual element of the kitchen.
- Recirculation system with an activated carbon filter – the air is passed through the carbon filter and directed back into the room, which makes it possible to use the unit even without an extraction duct.
- Airflow 270–580 m³/h, booster up to 740 m³/h – multi-level extraction that can be adjusted for both everyday cooking and more intensive frying.
- A-class energy efficiency – annual energy consumption of 56 kWh helps keep running costs under control even with frequent use.
- LED lighting – energy-saving lighting provides even and clear illumination of the worktop.
- Noise level 53–70 dB – allows the unit to be used daily and suits open living spaces well too.
- Electronic control – clear buttons or a panel make it easy to select the operating modes and lighting.
- Wide height range 365.5–1300 mm – allows the installation height to be adjusted according to the height of the kitchen island and the ceiling structure.
Compatibility, accessories and maintenance
This model is a hanging island cooker hood in the recirculation version, intended for installation above a kitchen island without a separate smoke duct. The connection diameter of the cooker hood is 150 mm, so before installation it is recommended to check the ceiling structure and the planned intermediate system to ensure a stable fixing. The adjustable height in the range of 365.5 to 1300 mm allows the unit to be fitted to kitchens of different heights, but before buying it is worth measuring the distance between the hob and the ceiling.
The cooker hood works with an activated carbon filter, which needs to be replaced regularly depending on the intensity of use and the manufacturer’s instructions. Several carbon filter kits suit the unit: an F8 type activated carbon filter kit with code 112.0157.240, a higher-performance FHP8 kit with code 112.0158.127, and an FLL8 kit with a longer service life with code 112.0185.278. In addition, there is also a cable extension kit with code 112.0691.642, which may be necessary if the unit is installed in a higher room. If you need help choosing a suitable kit, ask us.
In terms of maintenance, it is important to clean the outer surfaces of the cooker hood regularly with a soft cloth and a gentle cleaning agent to preserve the matt stainless steel finish. When replacing the carbon filters, the instructions given in the user manual should be followed to ensure efficient operation of the unit and avoid excess odours. Greasy or worn-out filters reduce the extraction power of the unit and may increase the noise level.
Installation and use
The cooker hood is installed on the ceiling directly above the kitchen island, following the manufacturer’s instructions on the recommended distance from the hob. Since this is a recirculation-type model, there is no need to connect the unit to an extraction duct, but an internal duct and a 150 mm connection are still used for the airflow. During installation, a secure fixing must be ensured and the electrical connection must comply with the applicable safety requirements.
In use, it is recommended to switch the cooker hood on shortly before starting to cook and to keep it on for some time after cooking has finished, to remove the remaining steam and odours. Lower speeds are suitable for everyday use; for intensive frying and heavy steam, a higher level or the booster mode can be chosen. The LED lighting can also be used separately as worktop lighting when the hob is not in use.
When to choose the FABER BEAT X/BK MATT F45/2 island cooker hood?
FABER BEAT X/BK MATT F45/2 is a suitable choice if you are looking for a hanging cooker hood above a kitchen island where there is no possibility or wish to connect the unit to the building’s ventilation duct. The recirculation solution with an activated carbon filter helps reduce the odours and smoke produced by cooking, and A-class energy efficiency together with LED lighting keeps energy costs under control. The matt stainless steel finish and the compact 45 cm width make this model suitable for both smaller and open kitchens, where both functionality and a modest but high-quality appearance are valued.



Reviews
There are no reviews yet.