Description
Clean kitchen air and compact design: wall-mounted cooker hood ELICA STONE WH/A/33
ELICA STONE WH/A/33 is a wall-mounted round kitchen cooker hood that helps remove cooking smells and steam from a small or medium-sized kitchen. The airflow range of 240–559 m³/h lets you choose a suitable power for the situation, the noise level is 44–67 dB, and the white painted steel finish suits modern light kitchens well.
Main features
- Efficient airflow of 240–559 m³/h helps remove steam and smells quickly, so that the kitchen air stays as clean as possible even during intensive cooking.
- Compact 35 cm round body is especially suitable for smaller kitchens or places with limited wall space but where good extraction power is needed.
- 3S Soft Light electronic control lets you conveniently choose between three extraction levels and switch the lighting on and off, ensuring an operating mode that suits your needs.
- Integrated worktop lighting ensures good visibility above the hob, making cooking more comfortable and safer even in a dimmer room.
- Extraction through ventilation with a 150 mm pipe connection suits standard ventilation ducts and helps carry moisture and smells straight outside.
- Energy-efficient operation with an annual energy consumption of 75 kWh and energy efficiency class C helps keep costs under control, while the lighting efficiency class A provides efficient lighting.
- Grease filtration class B shows that grease particles are captured effectively, which helps keep kitchen furniture and ventilation ducts cleaner.
- Separately ordered carbon filters F00333/S and washable F00431/S make it possible to add to the system when needed for better neutralisation of smells, following the manufacturer’s instructions.
Kitchen compatibility and maintenance principles
This model is wall-mounted and has a standard width of 35 cm, so it suits well above a hob where there is less space. The minimum installation height is 720 mm and the maximum 1150 mm, so the distance between the hob and the ceiling should be measured before installation. The ventilation connection is intended for a pipe with a 150 mm diameter, which makes it important to check the size of the existing ventilation duct when assessing compatibility.
The cooker hood is easy to use thanks to electronic control and the 3S Soft Light function. Choose a suitable extraction level according to the intensity of cooking and switch on the worktop lighting when needed. Maintenance consists mainly of regular cleaning of the grease filter according to the user manual and replacing or washing any carbon filters. The carbon filters F00333/S and washable F00431/S can be ordered separately, so the system can be adapted to the kitchen’s ventilation solution.
The airflow figures of 240–559 m³/h together with the noise level of 44–67 dB give a balance between performance and ease of use. Energy efficiency class C and fluid dynamic efficiency class C show that the appliance offers decent extraction power, while lighting efficiency class A and grease filtration class B emphasise efficient lighting and appropriate removal of grease particles.
Installation and use
To ensure safe and efficient operation, it is recommended to entrust the installation of the cooker hood to a competent installer. During installation, the recommended height above the hob as well as a suitable ventilation pipe and electrical connection must be taken into account.
- Measure the distance between the hob and the ceiling so that the installation height is within 720–1150 mm and the appliance is at a comfortable height in use.
- Make sure the wall has sufficient load-bearing capacity, then mark and fix the required fixings according to the manufacturer’s instructions.
- Connect the cooker hood to the existing ventilation duct using a pipe with a 150 mm diameter or a suitable adapter, avoiding excessive bends so as not to obstruct the airflow.
- Have the electrical connection made by a qualified electrician, following all safety requirements and the manufacturer’s instructions.
- After installation, check all operating modes, make sure the lighting and extraction levels work correctly, and familiarise yourself with the maintenance requirements.
Included in the package
The package includes the wall-mounted ELICA STONE WH/A/33 cooker hood with the manufacturer’s basic configuration. The carbon filters F00333/S and washable F00431/S are not included and must be purchased separately if needed, based on the recommendations in the user manual.
When to choose the ELICA STONE WH/A/33 cooker hood
This model is a good choice if you are looking for a compact, wall-mounted cooker hood for a small or medium-sized kitchen, with a round design and a white painted steel finish. ELICA STONE WH/A/33 combines decent airflow, electronic control and efficient lighting, offering a balance between performance, design and energy consumption. If you value clean kitchen air, functional lighting and the experience of a reliable manufacturer, this cooker hood is a practical choice for everyday cooking.


Reviews
There are no reviews yet.