Description
Shelly 3EM‑63T Gen3 – 1/3‑channel Wi‑Fi energy meter for DIN rail (up to 63 A)
Shelly 3EM‑63T Gen3 is a compact energy meter that can monitor either a three‑phase installation or three separate single‑phase lines. 4‑quadrant measurement shows both consumption and energy fed back to the grid, local data storage ensures the history is available, and the connection is made directly via Wi‑Fi and Bluetooth, so a separate gateway is not needed.
Main features
- 1 or 3 channels in one device: measures a three‑phase installation or 3 separate single‑phase lines.
- Measures voltage, current, active and apparent power, power factor and energy; accuracy meets class B (IEC 62053‑21).
- 4‑quadrant measurement: shows both consumption and energy fed back to the grid (suits PV and hybrid solutions).
- Local log: at a 1‑minute interval for at least 7 days; the built‑in clock ensures correct timestamps even without internet.
- Connectivity and security: Wi‑Fi 802.11 b/g/n and Bluetooth 4.2; incoming connections are protected with TLS encryption.
- Integration and automation: Shelly app and web interface, MQTT/HTTP/WebSocket, data export in CSV/JSON, up to 20 schedules and 20 web hooks (up to 5 URLs), scripting support; minimum load threshold 30 VA.
Versatile use in one module
The device is suitable for measuring homes, apartments, commercial buildings and solar electricity installations. The flat‑terminal cable and the housing are designed to be installed above or below a circuit breaker in a standard electrical cabinet; an 8 mm cable entry and a 0–63 A measuring range per phase cover most use cases.
Compatibility, data and operation without the cloud
Shelly 3EM‑63T Gen3 works through the Shelly Smart Control app and web interface and supports integration with MQTT, HTTP and WebSocket protocols. Measurement data can be exported in CSV or JSON format. Local data storage at a 1‑minute interval for at least 7 days and the built‑in clock allow the data to be viewed even when the internet is temporarily unavailable.
Installation and usage recommendations
Installation is carried out by a qualified electrician. Fix the device to the DIN rail, connect the power supply between terminals L and N, and route the conductor of each measured phase through the corresponding 8 mm cable entry, observing the current direction. For initial setup, use Bluetooth or the device’s Wi‑Fi access point and add it to the Shelly Smart Control app. If needed, create schedules and web hooks and set a minimum load threshold to avoid measuring very small loads.



Reviews
There are no reviews yet.