Description
Thermal paste for long-term use on processors and graphics cards
Thermal Grizzly Duronaut is a silicone oil-based thermal paste whose thermally conductive filler consists of aluminium microparticles and zinc oxide nanoparticles. The particles of different shapes and sizes adhere well to the surface and hold the paste in place when temperature changes tend to push it off the contact surface (the pump-out effect), so thermal resistance stays low. The fine particles let the paste be spread into a very thin layer.
Key features
- Operating temperature: −150 to +150 °C
- Electrical conductivity: 0 pS/m
- Colour: grey
- Use: processors, graphics cards and integrated circuits
Application
Before applying, clean the chip and cooler contact surfaces with a dry cloth or concentrated isopropyl alcohol. To use the applicator, screw it onto the syringe and cover the whole contact surface with as thin a layer of paste as possible. After use, pull the plunger back slightly so the paste returns from the applicator into the syringe, then unscrew the applicator and fit the cap. With a spatula, place a drop of about 3 × 3 mm on the surface and spread it slowly and with light pressure into an even layer; the TG Spatula Pro takes firmer pressure and spreads the paste more thinly.
In the box
- Duronaut in a syringe
- Applicator
- TG Spatula
- TG Spatula Pro






Reviews
There are no reviews yet.