Description
A vacuum and floor washer with one FreshStart filter
BISSELL CrossWave EdgeFind Select is a corded vacuum and floor washer with one FreshStart filter and a suction power of 22 AW. The appliance picks up dry debris and liquid and washes hard floors in one pass. Pet hair, kitchen crumbs and wet marks are carried by the brush roll into a separate dirty water tank, so clean cleaning solution is dispensed onto the floor.
Main features
- EdgeFind ZeroGap edge cleaning: the right side of the cleaning head extends beside skirting boards and furniture edges, leaving less uncleaned surface along the wall.
- FurFinder LED lights: lighting on the cleaning head brings out fine debris and pet hair in low light. In a BISSELL USA pet owner perception study picture comparison with the Shark HydroVac, the lighting made up to nine times more hair visible.
- Two-tank system: the 0.75 l clean water tank keeps the cleaning solution separate from the 0.54 l dirty water tank, where used water and debris collect.
- Automatic cleaning solution dispensing: the appliance automatically dispenses cleaning solution during floor washing.
- FreshStart odour control system: the FreshStart filter and FreshStart Clean-out Cycle cleaning solution help keep the appliance’s cleaning system fresh.
- ZeroGap Multi-Surface brush roll: Tangle-Free technology reduces hair and pet hair wrapping around the roll. The brush roll is removed from the cleaning head window with a tab pulled out, so it can be rinsed.
- 7.6 m power cord and self-cleaning: corded power lets you clean continuously without charging pauses. The self-cleaning cycle, started on the cleaning base, rinses dirt and hair from the brush roll and the inside of the appliance.
Floor washing and rug refreshing
Hard Floor mode is intended for hard floors, tiles, wooden floors and laminate. Area Rug mode refreshes loose rugs. In both modes dry debris is collected together with wet cleaning, so the appliance suits homes where floors are washed regularly and liquid dirt and crumbs need to be dealt with in the same cleaning pass.
Use and maintenance
Fill the clean water tank with water up to 60 °C and use BISSELL Multi-Surface or Natural Multi-Surface cleaning solution range. After cleaning, empty the dirty water tank, lift out the strainer, and rinse the tank, filter, brush roll and cleaning head window. Leave the cleaned parts to air dry for up to 24 hours.
Included in the box
- BISSELL CrossWave EdgeFind Select vacuum and floor washer
- 1 FreshStart filter fitted in the appliance
- 1 ZeroGap Multi-Surface brush roll fitted in the appliance
- Cleaning and storage base
- 2 × 236 ml Natural Multi-Surface Pet cleaning solution
- 236 ml FreshStart Clean-out Cycle cleaning solution
- User manual and safety instructions
For everyday wet cleaning
The appliance stands upright independently when parked, and the included cleaning and storage base gives it a firm place to stay. The replaceable wearing parts are the FreshStart filter and the ZeroGap Multi-Surface brush roll. The model is especially suited to homes with hard floors and loose rugs, where cleaning edges and making pet hair visible are part of everyday cleaning.









Reviews
There are no reviews yet.