Description
Tower server with a six-core Intel Xeon 6333P processor
The tower-chassis PowerEdge T360 uses an Intel Xeon 6333P with 6 cores, 12 threads, a 3.1 GHz base clock, 18 MB cache and a 65 W TDP. A 32 GB DDR5 ECC UDIMM module and 2 × 480 GB SATA drives are installed. The 4.5U chassis measures 382.5 × 175 × 579.72 mm.
Eight 3.5-inch drive bays and a PERC H755 RAID controller
The front holds 8 bays for 3.5-inch SAS or SATA drives, which can be swapped without shutting the server down. Arrays are managed by the PERC H755 hardware RAID controller, the performance model of Dell’s PERC 11 series. Four DDR5 ECC UDIMM slots take up to 128 GB of memory in total.
iDRAC9 Enterprise remote management and two 1 Gbit/s network ports
The embedded iDRAC9 Enterprise gives full control of the server through a dedicated iDRAC Ethernet port, even before an operating system is installed. The Enterprise licence adds a virtual console and AD/LDAP support. Two 1 Gbit/s Ethernet ports on a Broadcom 5720 controller connect the server to the LAN.
Redundant power and four PCIe slots
The two 700 W Titanium power supplies are redundant and hot-swappable, running on 200–240 V AC. Four PCIe slots take expansion cards: x8 Gen4, x16 Gen5, x1 Gen4 and x8 Gen4. For graphics workloads, one single-width accelerator of up to 60 W can be added.
Getting started
iDRAC9 is ready once the power and network cables are connected. The slide-out Express Service Tag on the front carries the Service Tag, the NIC MAC address and, with secure default access, the iDRAC default password. The ID button on the rear lights the system ID LED so you can pick out the right server. The front has a USB 3.2 Gen1 port and an iDRAC Direct micro-USB port; the rear has three USB 3.2 Gen1 and three USB 2.0 ports, VGA, a serial port and a Kensington lock slot.



Reviews
There are no reviews yet.