Description
TunaBone kamado 21/22 inch sealing felt – fibre felt set (1 set, 2 pcs)
TunaBone kamado 21/22 inch sealing felt is a heat-resistant fibre felt gasket set that you can use to refresh or replace the seal between the lid and body of your kamado-type grill. The new seal helps keep the temperature stable, reduces smoke leakage and protects the grill’s ceramic edges from wear. The set includes one complete set of two pieces, which fits most 21–22 inch kamado grill rim dimensions.
Product overview
This TunaBone fibre felt seal is intended for use on ceramic kamado grills with a diameter of about 21–22 inches. The seal is fitted to the contact surface between the lid and the main body, where it forms an elastic and tight contact. In this way, air and smoke cannot pass through unintentionally, which makes temperature control easier and can reduce charcoal consumption. The product is especially well suited to TunaBone Kamado Pro series grills, but it can also be used with other similarly sized kamado grills if the width and thickness of the seal groove are suitable.
Main features
- Designed specifically for 21/22″ kamado grills – intended for use on kamado grills with a 21–22 inch diameter.
- Fibre felt sealing material – felt-like fibre material that is elastic and suitable for repeated heating and cooling.
- Improves air-tightness – helps prevent unwanted air inflow and smoke leakage from the lid and body contact point.
- More stable temperature – more effective sealing keeps heat inside the kamado and makes it easier to maintain an even temperature during low and slow cooking.
- Set of 1 set = 2 pcs – the two pieces usually cover the edges of both the lid and the body, or replace the entire existing seal.
- Compact and light – approximate net weight 0.20 kg, gross weight 0.30 kg; easy to store and transport.
- Protection against mechanical wear – the seal reduces direct friction on the ceramic or metal edges and protects them from cracking.
Technical data
- Manufacturer: TunaBone
- Product name: Fibre felt for Kamado 21/22inch, 1set: 2pcs
- Compatibility: kamado grills with a diameter of about 21–22″ (compatibility with a specific model should be measured if necessary)
- Material: fibre felt (fibre felt; exact composition not disclosed by the manufacturer)
- Set: 1 set = 2 seals (2 pcs)
- Net weight: approximately 0.20 kg
- Gross weight: approximately 0.30 kg (including packaging)
- Packaging: light and compact box that fits easily on a shelf or in an accessories box
- Energy label: not applicable – a mechanical spare part that does not consume energy itself
Area of use and compatibility
This sealing set suits users whose kamado lid-to-base seal has worn, hardened or burnt through. The new fibre felt seal helps restore the grill’s tightness, which is especially important for long smoking sessions and low-temperature cooking. In general, the product suits:
- TunaBone Kamado Pro 22″ grill;
- other 21–22 inch kamado-type grills whose edge profiles and seal groove match a similar design.
Before purchasing, it is advisable to compare the width and thickness of your existing seal with the new one to make sure the dimensions match. If you use another brand of kamado grill, also check the manufacturer’s instructions for replacing the seal.
Instructions for use
Fitting is generally within reach for most users, but it requires thorough cleaning and proper gluing. The recommended general fitting process is as follows:
- 1. Removing the old seal – open the kamado lid and remove the old seal from the edges of both the lid and the main body. If necessary, use a plastic or metal scraper.
- 2. Cleaning the surfaces – scrape off any old adhesive residue, then clean the edges with a suitable solvent (e.g. spirit or another agent recommended by the manufacturer). Let the surface dry completely.
- 3. Preparing the new seal – unroll the TunaBone seal and place it around the edge to check the length. Cut off the excess with a sharp knife so that no excess thickness remains at the joint.
- 4. Gluing – apply heat-resistant adhesive (not included in the set) to the surface or the back of the seal, and press the seal evenly into place. Make sure the seal does not twist.
- 5. Curing time – let the adhesive dry according to the adhesive manufacturer’s instructions. During this time, avoid closing the lid firmly and avoid heating at high temperatures.
- 6. Initial heating – make the first firing at a moderate temperature so that the new seal and adhesive can settle. After that you can use the grill as normal.
Maintenance and durability
The TunaBone fibre felt seal does not need daily maintenance. Occasional visual checks are enough to spot any burnt-through or broken areas. It is best to avoid cleaning directly on the seal surface with stiff metal brushes, so as not to break the fibre material. Service life depends on how often you grill and at what temperatures – with proper use, the seal will generally last several seasons.
Why choose this kamado 21/22 inch sealing felt?
If you want to keep your kamado grill reliable and achieve an even, well-controlled temperature, a working seal is essential. The TunaBone sealing felt is a solution designed specifically for 21–22 inch kamado grills, offering good fit and simple fitting, and helping to reduce smoke leakage. Thanks to its compact packaging and low weight, it is a practical spare part, and having it in the garage or storage area lets you replace the seal quickly when needed.


Reviews
There are no reviews yet.