Description
TunaBone kamado charcoal grid 26 – charcoal grid for the Kamado 26″ grill
TunaBone kamado charcoal grid 26 is a round perforated charcoal grid designed for use in 26-inch Kamado-type grills (XL size). This metal grid supports the charcoal in the grill’s firebox, ensures proper airflow from below and helps maintain an even temperature for both direct and indirect grilling. It is not a cooking grate but a special charcoal grid that sits at the bottom of the firebox.
Product overview
If the original charcoal grid of your Kamado 26″ grill has cracked, warped or burnt through over time, TunaBone kamado charcoal grid 26 is a practical spare part. The round perforated metal plate gathers the charcoal into one zone while letting air move freely from below and from the sides. This makes it easier to light the grill, keeps the charcoal glowing better and allows more precise control of the grill’s internal temperature. Thanks to its shape, the grid fits the firebox area of the classic Kamado 26″ grill.
Key features
- Round charcoal grid for Kamado 26″ type grills
- Supports the charcoal and keeps it at the correct height in the firebox
- A large number of evenly spaced openings for good airflow and glowing of the charcoal
- Net weight approx. 0.90 kg, a sufficient mass for stability and heat resistance
- Suitable primarily for the classic Kamado 26″ XL-size grill
- Simple construction, no tools or additional parts needed for installation
- Can be used to replace the original grid or as an extra grid for a second charcoal zone
- Manufacturer: TunaBone
- Product name: Charcoal Grid for Kamado 26″
- Model designation: Charcoal grid 26
Technical data
- Product type: charcoal grid for Kamado grill
- Compatibility: 26″ Kamado-type grills (XL size), especially the TunaBone Kamado 26″ model
- Shape: round perforated metal plate
- Net weight: 0.90 kg
- Gross weight (with packaging): 1.00 kg
- Package dimensions: approx. 250 × 250 × 250 mm (width × height × depth)
- Package volume: 0.02 m³
- Packaging material: approx. 100 g of paper/cardboard
- Manufacturer: TunaBone
- EAN: 2000001343982
- Built-in battery: none (passive metal component)
- Waste electrical and electronic equipment (WEEE) fee: not applicable
Note: if you need the exact diameter of the grid to check compatibility, please ask us before purchase.
Fit and compatibility
TunaBone kamado charcoal grid 26 is designed for use with 26-inch Kamado grills. The grid is intended primarily for the TunaBone Kamado 26″ model. If you use a 26″ Kamado grill from another manufacturer, compare the dimensions of the grid with the firebox of your grill to check compatibility. You can ask us for the exact diameter and compare it with the internal dimension of your existing grid or firebox.
Energy efficiency and running costs
The product is a fully passive metal grid with no electricity or gas consumption, so it has no energy label. Indirectly, a properly designed charcoal grid still helps save fuel: evenly spaced openings and a stable position in the firebox improve the charcoal’s air supply, which reduces situations where the charcoal goes out for lack of air and extra charcoal has to be added. In this way, TunaBone kamado charcoal grid 26 can help maintain a more stable temperature with a smaller amount of charcoal.
Use and maintenance
Installation and use
- Place the charcoal grid at the bottom of the Kamado 26″ grill’s firebox or on the supports intended by the manufacturer.
- Spread the charcoal or briquettes evenly over the grid, leaving the openings partly free for airflow.
- Light the charcoal according to the general instructions for your Kamado grill and adjust the air vents to control the temperature.
- The grid can be used at both low smoking temperatures and high grilling and roasting temperatures, following the grill’s own limits.
Cleaning and maintenance
- Before cleaning, let the grill and the charcoal grid cool down completely.
- Remove most of the ash from on and around the grid by tapping or using an ash tool and a brush.
- For heavier dirt, use a suitable grill brush; avoid very abrasive tools that may wear the surface excessively.
- Where possible, keep the grid dry, especially if the grill will stand unused for a longer period.
- It is recommended to leave the grid in the grill or store it in a dry room to avoid prolonged contact with moisture and standing ash.
Durability and value for money
The charcoal grid is made of strong metal and weighs approximately 0.9 kg, indicating stability and heat tolerance. As it is a simple, immovable spare part with no mechanisms or electronics, the likelihood of mechanical failure is low, provided the grid is not overloaded or left standing in wet ash for long periods. Given that the grid is adapted specifically for the Kamado 26″ grill, it is a suitable and cost-effective solution for restoring the grill’s operating reliability or creating a second charcoal layer.
Included and additional recommendations
- Included: 1 × TunaBone kamado charcoal grid 26
- Not included: grill body, firebox, cooking grates, ash pan or other accessories visible in the picture.
- Recommended accessories: good-quality lump charcoal, an ash tool and a grill brush for easier cleaning of the grid.
In summary, TunaBone kamado charcoal grid 26 is a practical and necessary spare part for owners of a 26-inch Kamado grill who want to restore correct airflow and charcoal placement in their grill without replacing the whole firebox.


Reviews
There are no reviews yet.