Description
Computer speakers with USB power and Bluetooth
The Edifier R20BT are 2.0 computer speakers with a total output of 5 W RMS (2.5 W + 2.5 W) that connect to a computer by USB cable and to a phone over Bluetooth. The USB cable attached to the speaker carries both power and audio from the computer, so the speakers run from a single plug.
Bluetooth 6.0, AUX input and headphone jack
With multipoint, the Bluetooth 6.0 receiver keeps two devices connected at once, and you can switch the audio source without pairing again. The AUX input on the base takes a computer, tablet or other device with an AUX or RCA output. For private listening and calls the base has a 4-pole 3.5 mm headphone jack that works with headphones with or without a microphone.
Sound profiles and lighting effects
Each speaker has a 70 mm full-range driver and a bass reflex port, in an MDF cabinet that reduces resonance and distortion. There are three preset sound profiles, Classic, Dynamic and Vocal, and you can create your own in the app. The built-in lighting has preset effects and you can design your own in the app; the touch button on the base switches effects or turns the light off.
Use
The speakers start when the USB plug is connected to the computer, and volume and audio source are controlled from the touch panel on the base. The EDIFIER ConneX mobile app and the EDIFIER TempoHub computer app switch the audio source, sound and lighting effects and the left and right channels; playback control is in ConneX. Swapping the channels lets you place the speaker with the USB cable on either side of the desk.
In the box
- 2 speakers, one with an attached 1.5 m USB cable
- 1.8 m connecting cable between the speakers





Reviews
There are no reviews yet.