Description
4-fan PC case with mesh front and glass side panel
The white darkFlash DRX70 MESH PC case takes an ATX motherboard as well as Micro-ATX and Mini-ITX boards. The frame is 0.6 mm SPCC steel, the front panel an iron and ABS mesh and the side panel tempered glass. Four pre-installed darkFlash C7 RGB fans are included.

Room for a long graphics card and seven add-in cards
The case takes a graphics card up to 350 mm, held from below by a height-adjustable graphics card support. The bottom-mounted ATX power supply can be up to 200 mm long and the CPU cooler up to 180 mm high. The case has seven expansion card slots and holds one 2.5-inch SSD and two 3.5-inch hard drives.

Magnetic front panel and tidy cables
The magnetically attached front panel lifts off for cleaning the interior or changing parts. Cables run through grommeted openings, and the feet have shock-absorbing pads.

Eight fan positions and liquid-cooling support
The case holds up to eight 120 mm fans or six 140 mm fans: three at the front, two at the top, one at the rear and two 120 mm fans in the PSU compartment. A liquid-cooling radiator can be 240 or 280 mm at the top and 120 mm at the rear.

USB-C and USB 3.0 on the I/O panel
The I/O panel has a USB-C port, a USB 3.0 and a USB 2.0 port, a microphone input, a headphone output and power and reset buttons. Unused sockets can be covered with dust plugs.

In the box
- PC case darkFlash DRX70 MESH, 1 pc
- RGB fan darkFlash C7, 4 pcs, pre-installed
- Dust plugs for USB and audio sockets











Reviews
There are no reviews yet.