Description
Colour night vision security camera for wide outdoor areas
The bullet-shaped colour night vision security camera Dahua WizMind 5 IPC-HFW5459T1-ASE-PV-PRO records a 2688 × 1520 pixel image with a 1/1.8-inch CMOS sensor. The 2.8 mm F1.0 lens of this variant covers a 111° horizontal field of view. The camera mounts on a wall, ceiling or pole and can be panned 360°, tilted 0–90° and rotated on its axis.
With one cable a PoE-powered security camera gets both power and network
A PoE-powered security camera is a camera that takes power and data from the same Ethernet cable, so no socket is needed next to it. Power is fed into the cable by a PoE switch, a network switch that supplies power, or by a PoE injector fitted in between. The camera works with a PoE+ (IEEE 802.3at) port and draws up to 24.2 W; 12 V DC power is the alternative, and with both connected the camera keeps working if one fails. A PoE camera suits a fixed wired network, a Wi-Fi camera a spot within wireless coverage and near a socket.
Colour image in the dark
WizColor uses weak moonlight and city light and gives a colour image of the whole scene from 0.0001 lux. In darkness the warm light reaches 60 metres and the infrared 80 metres. 140 dB wide dynamic range keeps detail visible in scenes filmed against the light.
Detection, talk and deterrence
Perimeter protection spots intrusion, tripwire crossing and fast movement and tells people, vehicles and animals apart; a self-learning algorithm filters out false alarms. The camera also counts people with reports, detects faces, builds a heat map and spots abandoned or missing objects. Two microphones and a speaker allow two-way talk, and on an alarm a warm warning light comes on for 5–30 seconds and one of 11 sounds or up to 10 of your own plays.
Recording and IP camera compatibility
Video is stored on a microSD card of up to 1 TB, on a NAS or an FTP server. With ONVIF Profiles S, G, T and M the camera connects to a network video recorder (NVR), which collects several cameras in one place. The DMSS app for iOS and Android and the DSS software are used for viewing and setup. The housing is rated IP67, withstands 30 minutes at 1 m depth and a 20 J impact under IK10, and operates from −40 °C to +60 °C.
Installation
The mounting surface must hold three times the weight of camera and bracket. The memory card is fitted with the camera unpowered, and holding RESET for 10 seconds resets the camera. The cable can run through the side cable tray of the bracket or through the mounting surface; outdoors the waterproof connector is fitted, and finally the lens angle is set.
Cleaning and care
Blow dust off the lens with an air blower and, if needed, wipe it with a soft cloth moistened with alcohol. Clean the body with a soft dry cloth, using a neutral detergent for stubborn dirt, without volatile solvents or abrasives.




Reviews
There are no reviews yet.