Description
Smart thermostat for water heating with Wi-Fi and Matter, for wall mounting
The wall-mounted Meross MTS215BMA-B smart thermostat for water heating controls a boiler or hydronic floor heating and switches loads of up to 3 A. The temperature can be set from 5 to 35 °C with ±0.5 °C accuracy.

Voice control from smart home platforms
The thermostat connects over 2.4 GHz Wi-Fi (IEEE 802.11 b/g/n) and Bluetooth Low Energy and supports Matter, so you can change the temperature with Apple Home, Amazon Alexa and Google Home voice commands. The Meross app runs on iOS 16.1 and Android 8.1 or later.

Heating planning in the Meross app
In the app you can build a heating schedule around your daily routine. Open window detection stops heating automatically, and the app shows usage by day, week and month.

Touch panel and operating modes
You can change the temperature directly on the thermostat’s glass touch panel. The app shows the current heating status and switches between Manual, On and Auto modes; the presets include an economy mode.

Installation in a flush wall box
The thermostat is flush-mounted and needs a live and a neutral wire. A boiler needs at least four wires and floor heating three. The wall box must be deeper than 32 mm with 60 mm between its fixing screws. The housing measures 86 × 86 × 48 mm and the supply voltage is 100–250 V~, 50/60 Hz.

In the box
- Smart thermostat Meross MTS215BMA-B, 1 pc
- Sensor (β = 3380, R25 = 10 kΩ)
- Screws, 4 pcs
- Wiring label
- User manual

Reviews
There are no reviews yet.