Description
4-zone irrigation controller for DC valves and valve boxes
The RainPoint ITC407 4-zone irrigation controller drives DC latching and solenoid valves in four watering zones. It runs on four AA batteries and its IP68-rated housing (dust-tight and protected against continuous immersion) is made for fitting directly in a valve box. An LCD display and buttons on the housing are used for setup.


Two watering programs with up to four starts
Programs A and B run separately or together, and each takes up to 4 start times a day. Run time can be set from 0 to 240 minutes and the interval from 1 to 12 hours or 1 to 31 days. When several zones are due at the same time, the controller opens them in turn.

Water budget, rain delay and rain sensor
A percentage setting from 10 to 200% adjusts the watering amount to the weather or season. Rain delay pauses watering for 24, 48 or 72 hours and the set programs are kept. An external NC rain sensor (normally closed contact) can be connected to pause watering automatically when it rains.

Installation
Insert the batteries, connect the valve wires and set the programs on the display. Then screw the ground stake onto the base of the controller and place it in the valve box. The controller operates at 3–50 °C.

In the box
- Irrigation controller RainPoint ITC407, 1 pc
- Allen key, 1 pc
- Ground stake, 1 pc
- User manual




Reviews
There are no reviews yet.