Description
Anemometer for measuring air velocity, air flow and temperature
The UNI-T UT362H anemometer measures air velocity up to 30 m/s, air flow up to 999,900 m³/min and temperature from −20 to +70 °C. The meter body and the probe are separate; the probe sits on a telescopic aluminium alloy rod and reaches into ventilation ducts and hard-to-reach spots.

Air velocity in six units and air flow from the duct cross-section
You can show velocity in m/s, km/h, mph, fpm, knots or on the Beaufort scale; accuracy is ±(4% of reading + 0.1 m/s). To measure air flow you enter the diameter of a round duct, the width and height of a rectangular duct or the cross-sectional area, and the result is shown in m³/min, CFM or l/s. Air velocity can be measured in fast or slow mode and the reading updates every 0.5 seconds.

Temperature with a platinum resistance sensor
Air temperature is measured by a platinum resistance sensor with an accuracy of ±0.5 °C between 0 and 40 °C and ±0.8 °C across the rest of the range. Temperature can be shown in degrees Celsius or Fahrenheit.
Statistics, memory and battery power
The meter shows the maximum and minimum values, the time average and the multi-point average. Data Hold freezes the reading on the backlit display and the memory can store 99 readings. It runs on three 1.5 V AAA batteries and switches off after 5 minutes without use when auto power-off is enabled. After switching on, the meter is ready in 5 seconds.

In the box
- Anemometer UNI-T UT362H, 1 pc
- AAA alkaline batteries, 3 pcs
- Fabric bag
- Quick start guide
- Safety instructions


Reviews
There are no reviews yet.