Description
Clamp meter for AC and DC current up to 400 A
The UNI-T UT203R clamp meter measures AC and DC current without breaking the circuit: the jaws close around the conductor and the reading appears on the display. The jaw opening is 28 mm and the current range is 0.04–400 A with an accuracy of ±(2% + 5). True RMS measurement gives the true effective value even with distorted waveforms.

Voltage, capacitance and frequency
With the test leads the meter measures AC and DC voltage up to 600 V: AC voltage with ±(0.8% + 5) accuracy at 10 Hz to 60 kHz and DC voltage with ±(0.5% + 2). Resistance reaches 40 MΩ and capacitance 40 mF. Frequency is measured from 10 Hz to 10 MHz.


Continuity, diode test and data hold
The meter selects the range automatically and tests continuity and diodes. Data hold keeps the reading on the display and MAX/MIN mode records the highest and lowest value. Relative mode and DC zeroing remove the offset from the reading. Non-contact voltage detection (NCV) shows voltage in a conductor without contact. Results appear on a 4000-count backlit 37 × 25 mm display.
Measurement category and power
The meter is rated CAT II 600 V and CAT III 300 V: CAT II covers appliances plugged into sockets, CAT III building distribution boards and fixed wiring. It runs on two AAA batteries (R03, 1.5 V), indicates a low battery and switches itself off when left unused.
In the box
- Clamp meter UNI-T UT203R, 1 pc
- Test leads
- AAA batteries, 2 pcs
- User manual



Reviews
There are no reviews yet.