Description
Infrared thermometer and probe thermometer in one housing
The UNI-T UT320T infrared thermometer measures surface temperature without contact and internal temperature with its probe, in both modes across -40…300 °C.

Two measuring modes for different tasks
In infrared mode it shows the result within 500 ms and a class 2 laser marks the measuring point. The optical ratio (D:S) is 8:1: at 102 mm the measuring spot is 13 mm, at 203 mm it is 25 mm. Emissivity can be set from 0.1 to 1.0 in steps of 0.01 so that readings on different surfaces are correct. In probe mode accuracy at 0–300 °C is ±1.0 °C or ±1% of reading, in infrared mode ±2.0 °C or ±2%.

Comparing and holding readings
The Max/Min function shows the highest and lowest value of a continuous measurement and T1–T2 calculates the difference between two measurements. With measurement lock the infrared mode measures continuously without holding the button. The backlit display is 18 × 28 mm and the unit can be switched between °C and °F.

Use
With the probe folded, the Scan|Hold button switches the thermometer on in infrared mode and the reading stays on screen when the button is released. Unfolding the probe starts probe measurement automatically: insert the probe at least 12.7 mm deep and read the value once it has stabilised. Take the probe out of the object after 1 minute. It runs on 2 AAA batteries, giving about 30 h in infrared mode and about 180 h in probe mode.

Cleaning and care
Clean the housing and probe with a damp sponge or soft cloth, then dry the thermometer. Clean the infrared sensor lens with a cotton swab moistened with water or medical alcohol.
In the box
- Infrared thermometer UNI-T UT320T, 1 pc
- AAA battery, 2 pcs
- User manual




Reviews
There are no reviews yet.