Description
RC battery charger for 6S lithium packs of drones and models
The dual-channel SkyRC PC1080neo RC battery charger charges two batteries at once, each at up to 540 W.


Two independent channels
Each channel has its own XT90 charge port, balance port and mode, current and start buttons, so two batteries can be charged in different modes and at different currents. Charge current is set in 1 A steps.

LiPo, LiHV and Li-ion batteries
The charger is made for six-cell (6S) LiPo, LiHV and Li-ion batteries. The cut-off voltage can be set to 4.15–4.25 V per cell for LiPo, 4.25–4.50 V for LiHV and 4.05–4.25 V for Li-ion.

Fast charge, balance charge and storage
Modes are fast charge, balance charge with up to 2.1 A balance current, and storage. For long-term storage the charger charges or discharges the pack to storage voltage: 3.85 V per cell for LiPo, 3.90 V for LiHV and 3.80 V for Li-ion, with up to 30 W discharge power per channel.

Colour screen and battery measurement
The 2.8-inch colour screen (320 × 240 pixels) shows current, voltage, charged capacity and charge percentage for both channels. The charger also measures battery voltage and internal resistance and remembers the last LiPo charge settings.


Active PFC and protection
The power stage with active power factor correction (PFC) has an efficiency of about 90% according to the manufacturer. Charging is controlled by an ARM Cortex-M3 processor. The charger has short-circuit, reverse polarity, over-temperature and over-voltage protection, plus an adjustable safety timer and capacity limit.

Charging hub and firmware updates
With the SkyRC G630neo charging hub the two ports can charge up to 12 batteries in sequence, six per port. Firmware is updated over the USB-C port with the Charger Master app.

Use
Plug the charger into the mains and switch it on at the back, then connect the battery to the XT90 port at the front together with its balance lead; reverse the order when disconnecting. Choose the mode with the M button, the current with the A button and start charging with the Enter button. Holding Enter for 5 seconds opens the settings for cut-off voltage, safety timer, capacity limit and language.

In the box
- SkyRC PC1080neo RC battery charger, 1 pc
- Power cord, 1 pc
- Balance extension cable, 2 pcs


Reviews
There are no reviews yet.