Description
RC battery charger with four independent channels
The SkyRC Q100neo RC battery charger charges four batteries at once, each channel at up to 6 A. It charges LiPo, Li-ion, LiFe, LiHV, NiMH, NiCd and lead-acid batteries, and each channel can run a different battery type and mode.


Power shared between the channels
On mains power the charger shares its 100 W between the channels in use: one channel gets up to 60 W, two get 50 W, three 33 W and four 25 W each.

Mains or DC power
The charger has two power inputs: a 100–240 V AC input and a 10–30 V DC input with an XT60 connector. On DC power the total output is up to 240 W, with up to 60 W per channel.

Modes for every battery type
Lithium batteries (1–4S) can be charged with or without balancing, discharged and brought to storage voltage; balance current is up to 600 mA. NiMH and NiCd batteries (1–8S) can be charged, discharged, peaked twice in a row and cycled 1–3 times. Lead-acid batteries (3S and 6S) have normal, AGM, cold-weather charging and discharge.

Adjustable DC power supply
The charger also works as a four-output adjustable power supply: voltage can be set from 1 to 30 V and current from 0.1 to 6 A. The output switches between constant-current and constant-voltage mode automatically according to the load.

Colour screen and scroll wheel
The 2.8-inch colour screen shows all four channels at once: battery type, mode, current, voltage and charged capacity. The menu is operated by turning and pressing the scroll wheel, and the PORT button switches channels.

Protection
When charging, the charger reduces power at 75 °C and stops at 100 °C. The output and the DC input are protected against reverse polarity, and the DC input also has low-voltage and over-voltage protection. Charging is limited by an adjustable safety timer (1–720 min) and a capacity limit (100–50,000 mAh).

Use
Connect power to the AC or DC socket at the back first, then the battery to the charge port at the front; reverse the order when disconnecting. Connect lithium batteries with the balance lead too, black wire to the negative marking. In the charge settings choose battery type, cell count, mode, cut-off voltage and current, then start the program by pressing the wheel.
In the box
- SkyRC Q100neo RC battery charger, 1 pc
- Power cord, 1 pc
- Instruction manual, 1 pc

Reviews
There are no reviews yet.