Description
TV wall mount with 12-degree tilt and magnetic release
The tilting TV wall mount Neomounts WL35-550BL14 from the LEVEL 550 series fits 40–75-inch TVs weighing up to 50 kg and VESA patterns from 100 × 100 to 400 × 400 mm. To set the viewing angle, the screen tilts through 0–12°.
Standard VESA mount fits TVs of different makers
A VESA mount is a standard pattern of threaded holes on the back of a flat-screen TV, whose spacing in millimetres must match the holes of the mount. The WL35-550BL14 supports 17 VESA patterns and comes with M4, M5, M6 and M8 machine screws, of which TVs with larger patterns use M6 or M8. A TV maker’s own mount is designed for that maker’s models, while a VESA wall mount fits any TV whose holes and weight stay within the mount’s limits.
Pull straps hidden by magnet and spirit level
To release the TV from the wall plate, pull straps hang below the adapter brackets; after installation they attach to the mount by magnet and stay hidden behind the screen. To level the wall plate, it has a built-in spirit level.
Installation
Drill 5.5 mm diameter holes into a wooden stud wall or 10 mm diameter holes into a solid brick or concrete wall, 60 mm deep in both cases, and use the supplied wall plugs in concrete and brick. Fix the wall plate with the M8 wall screws and washers. Screw the two adapter brackets to the back of the TV, with spacers if needed, hang the TV on the wall plate and tighten with the spanner. To take the TV off the wall, pull the straps.
In the box
- TV wall mount Neomounts WL35-550BL14, 1 pc
- Wall plate with built-in spirit level, 1 pc
- Adapter brackets with pull straps, 2 pcs
- TV screws M4, M5, M6 and M8, 16–50 mm long, 36 pcs
- Spacers 5 mm and 14 mm, 12 pcs
- Washers M6 and M8, 8 pcs
- Wall plugs, 4 pcs
- Wall screws M8 × 50 mm, 4 pcs
- Spanner, 1 pc










Reviews
There are no reviews yet.